With the rapid development of the home improvement industry, a variety of new tiles have emerged. However, in the face of this huge ceramic tile market, many homeowners do not know how to choose the ceramic tile that they are satisfied with, but they do not know what to do. "Calculation", how can this be done? Today, we teach you some of the tiles to buy Cheats.
Glazed tiles may create violent glaze
Many people will encounter the problem of cracking of ceramic tiles. One condition of tile cracking is caused by deformation and cracking of the wall. When the cement is overlaid, the marking of the cement is too high and cracking of the tiles is likely to occur. As for the ceramic tile itself, there is also a phenomenon of cracking, which is the “violent glazing†of the glazed tile. The reason for this is that the glazing is not uniform in thickness during production, and it causes partial glaze cracks when burned in the kiln. It is recommended that consumers More choices for trusted brands buy tiles.
The more delicate the tile particles are, the stronger the strength is
The strength of a tile is related to its compressive and flexural properties, and its strength depends on its density. In this regard, consumers in the selection of tiles, especially for the choice of living room and other public space tiles, you can view the delicateness of the tile on the back of the tile to identify the level of tile intensity, under normal circumstances, the more delicate tile particles, density The higher the damage, the higher its destruction.
Buy ultra-bricks to guard against excess zirconium silicate
The ceramic tile radiation in the quality inspection report was not up to standard. According to Yu Bin, Secretary General of the China Building Sanitary Ceramics Association, tiles and other ceramic products have radiation. For countries with high environmental standards such as Germany, there is no similar conclusion. Thus, tiles, etc. The environmental performance of ceramic products is indisputable and consumers can use it with confidence. In addition, for materials such as ceramic tiles and other ceramic products, Sui Bin said that radioactive materials will continue to decay, these raw materials after natural purification and artificial processing, its radioactivity is negligible. As long as consumers purchase quality Class A tiles, even if they use a larger area, do not worry about their radiation problems.
The unqualified products that were detected this time were also mainly due to the addition of zirconium silicate as the test substance. It is understood that in the production process of polished tiles, in order to achieve the effect of whitening, zirconium silicate is added in an appropriate amount, and some companies add excessive amounts of ultra-white tiles to produce ultra-standard tiles.
Wall tiles are not as good as water absorption
Many people think that the lower the water absorption rate of ceramic tiles, the better, because ceramic tiles with higher water absorption are more likely to absorb water, and after thermal expansion and contraction, they will cause cracks on the surface of ceramic tiles and peeling of the entire tile. However, the lower the water absorption rate, the better. Relatively speaking, for the wall tile, it still needs a certain water absorption rate to ensure that the wall tile's hollowing rate is reduced when the cement mortar is laid, and the paving is firm. If you do not use any tile adhesives, only cement mortar, it is recommended to select the water absorption within a certain range of wall tiles, such as about 10%, while paving, we must ensure that the wall tile soaking time is sufficient, 2-4 hours is appropriate . If you choose some tiles with lower water absorption, it is recommended to add safe and environmentally friendly tile adhesives when laying.
Tile tile brand living room cement space home improvement ld tile
A treatment plant for lake Kinneret water, comprising treatment by two filtration steps, flocculation and disinfection with chlorine dioxide, was studied with a view to evaluating the effect of ClO2 disinfection on drinking water quality and determining the optimal mode of operation for the treatment plant. Four modes of operation were studied and the optimal mode was defined as that in which the flocculant (aluminium sulphate) was introduced before the first, and ClO2 after the second, filtration. The finished water contained a residue of approx. 0.2 mgl−1 ClO2, approx. 0.35 mgl−1ClO2− and low concentrations of suspended matter (1.5 mgl−1) and of chlorophyll (0.1 μgl−1). Trihalomethane concentrations were negligible, and the bacteriological quality of the water was within the health authorities' requirements. It was shown that disinfection of treated water (after flocculation and filtration) was much more effective than that of raw water. Furthermore, disinfection in the optimal mode prevents accumulation of high chlorite concentrations leaving a residue of ClO2.
*Related Products:water cleaner chemical clo2.
Chlorine Dioxide For Brewery Factory, Chlorine Dioxide For Paper Bleach, Chlorine Dioxide For Beverage Factory, Cooling Water Treatment
Nanjing Ligong Shuifu Environmental Protection Technology Co.,Ltd. , http://www.watermanclo2.com