Ceiling materials for kitchens and bathrooms include PVC plastic gussets, aluminum-plastic panels, and aluminum gussets. All aspects of aluminum buckle plate performance is good, is the mainstream choice of kitchen and toilet ceiling. Next, Xiaobian will share tips for the installation of aluminum ceilings with friends, hoping to help you.
Part1: Learn about the installation of aluminum buckle ceiling
The aluminum buckle plate is a three-layer composite plate with a plastic core and an aluminum plate, and a decorative or protective coating applied on the surface.
First, the advantages of aluminum buckle
The aluminum buckle plate has the advantages of flat surface, distinct ridgeline, flame retardant, anticorrosion, moisture resistance, etc.; and convenient assembly and disassembly, each plate can be disassembled and installed independently, convenient for construction and maintenance; besides, the aluminum buckle plate is also installed. The kitchen and bathroom rooms in the ceiling give the impression of cleanness, elegance, and bright vision.
Second, aluminum buckle board purchase trick
When you purchase, you can read the product's specifications, length, thickness, etc., or judge the thickness of the aluminum gusset by the naked eye and feel; In addition, in addition to whether the kanban surface is smooth, you need to look at the elasticity and toughness of the aluminum gusset, you can choose by One template, bend it by hand. After the aluminum with good texture is bent, it will rebound to a certain extent.
Third, the construction of aluminum buckle ceiling
In the early construction phase, the main materials for the aluminum buckle ceilings are: Light steel dragon skeleton main parts (including the main keel), connecting parts, hanging parts, and spare parts (including suspension rods, basket screws, injection screws, tapping screws) Etc), adhesives and aluminum gussets etc.
Part2: Seven Basic Steps in the Installation Process of Aluminum Veneer Ceilings
The installation process of aluminum ceiling plate ceilings includes: catapult → installation of main keel boom → installation of main keel → installation of sub keel → installation of aluminum bar → installation of aluminum buckle plate → installation of lamps and vents.
First, the line
According to the horizontal line of the floor elevation, use the vertical vector of the ruler to reach the design elevation of the ceiling, play the position line of the keel on the top plate, and bomb the horizontal line of the elevation of the ceiling on the wall.
Second, install the main keel boom
After elevating the horizontal elevation line of the ceiling and the main keel position line, the elevation of the lower end of the boom is determined. According to the position of the main keel and the spacing between the hangers, one end of the suspension rod without bolts is fixed under the floor with an expansion bolt; the boom is used for 6 m. Reinforced steel (8mm flat steel).
Third, install the main keel
Fit the suspender nut and pre-mark the pendant on the main keel. Put the main keel of the assembled pendant into the corresponding hanger bolt according to the position of the splitter wire, and tighten the nut to match the main keel. Fit the fittings, pull the wire to adjust the elevation and straight, attach the main keel to the installation hole, set and connect the fastening.
Fourth, install the secondary keel
According to the already subminded sub keel line, the card is placed with secondary keel triangles, and wooden keel is used. The spacing between the secondary keels is 600mm. The main keel spacing according to the design will be used to suspend the secondary keel through the triangle pendant. On the keel; When the length of the secondary keel needs multiple continuous extensions, use the secondary keel to connect the secondary keel while connecting, straighten and fix it.
Fifth, the installation of aluminum bars
The specification of the aluminum strip is: 25mm*25mm. The elevation of the ceiling is required to fix the aluminum strip around the wall with cement nails.
Sixth, install the aluminum buckle board
When installing the ceiling aluminum buckle plate, press lightly in the order of the flanges and place the two sides of the square plate completely into the secondary keel, and then push tightly. Strictly prohibit loading and unloading; and adjust the side aluminum strips to straighten out the fixed side aluminum plates. According to the design requirements, 600mm*600mm punched aluminum gusset plate is used for the ceiling of the project.
Seven, install lamps and vents
According to the ceiling plan layout, layout lamps and vents; installation of aluminum buckle plate, according to the size of lamps and vents to open holes, install lamps and vents.
Suspended ceiling, suspended ceiling, design layout, cement room, decorative kitchen and ceiling
Loneng logo is top quality Rotary Hammer, Electric Hammer,electric Hammer drill in the china.This machine could give you more easy and fast working feeling.Could make your working more efficiency.This logo machines' silicon steel is Baosteel 45 cold-rolled steel material.The round copper wire is high temperature.The commutator is certificated in china.The quality must be certificated.We also control the tolerance and allowable to error in the different of spare parts in one machine.
This machine 608 bearing use C&U original bearing.Another bearing also use certificated quality.The power and working efficiency is highest in china market.LONGNENG is in the life of from scratch,from gifted,from excellent, to cope with the market competition down-to-earth.
Our products have set a good reputation in china. and have good feedback of the quality in china market.We are been paid more attention by the old and new customers in the world also.
LONENG Rotary Hammers, LONGNENG Rotary Hammer Drill, Cordless Rotary Hammer Drill, Air Rotary Hammer Drill, Pneumatic Rotary Hammer Drill
Yongkang Longneng Power Tools CO., LTD. , http://www.longnengtool.com