The high and low end insertion force tester load displacement curve meter shows that the high and low end insertion force testing machine and load curve instrument must first understand all kinds of insertion and extraction force and curve instrument on the market, no matter which supplier. Regardless of whether you are a manufacturer or not, the model 1220S, S205 will be fixed. The high-end import and export force testing machine is about 90,000~120,000, of which the European and American brands even reach 200,000, followed by the local brand-mg brand: the earliest domestic development, the national patent, the most complete testing function, the market share is the most extensive. Supplier. The second is the low-end plug-in force. Basically, the program is purchased from a software company. It is a Taiwan-like brand interface. It has no software development capability. It is just assembled, the test function is single, and the parameters are set to be limited. For example, the test speed can only be 150mm/min), and the sensor protection function is easy to damage.
In the previous paragraph, I was fortunate to have a customer's invitation to carefully compare and analyze our plug-in force testing machine. The load curve meter and the low-cost low-end test machine on the market made some detailed comparisons between hardware and software. The purpose of the customer is also to understand the difference in price that will lead to some differences in the test machine. What kind of deficiencies will occur in the use of this low-end test machine in the future, and there is no problem after the sale. My driver and low-end machines are disassembled to see the hardware and software features. The attached materials are compiled from pictures of the scene comparison. Perhaps it is not very familiar with the insertion force testing machine, and the prospective customers of the load curve meter are very helpful in purchasing.
The purpose of this article is only to seek truth from facts to compare the differences between the testing machines, not to any supplier on the market. The insertion force tester, the load curve meter itself is a commodity, as long as it is a commodity, there will be grades, the price is high and low, and the quality is high. Customers choose to purchase according to their own needs and economic ability. Just like buying a shirt, 30 yuan a piece, 300 yuan a piece or even higher, the people are also buying according to their own circumstances. In general, the insertion and extraction force of the milligram brand and the curve meter are several thousand or tens of thousands higher than other similar test machines in China (depending on the configuration)
Recently, some customers have responded to the insertion force of our company, and the curve meter appeared on the market. The software is basically the same as ours, but they are single-chip microcomputers. In terms of data acquisition and test accuracy, there is still a big difference with our test machine. Therefore, customers should consider clearly when purchasing, add more test data, and see the prototype. Our test machine is well distinguished from the hardware: the data connection line is 32 pins and 64 pins, the sensor can be protected by multiple consecutive impacts, and the static state can withstand the load gravity exceeding 500% of the load value (this is no one in the country) and).
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Copper nuts made of all kinds of embossed wire (usually lead brass, such as H59, 3604, 3602). Our daily contact with the embedded knurled copper nuts are processed by precision automatic lathes. The reference standard of embedded knurled copper nut comes from GB/T809, but the technical parameters of all kinds of embedded nuts produced by our company exceed the relevant indexes required by the national standard.
Knurling copper nut is mainly used for hardware Spring, shaped spring, craft gift spring, battery spring, spring antenna,key ring, phosphorus copper spring CNC automatic lathe turning parts (copper car parts, iron, aluminum car parts), metal stamping parts, electronic parts, iron shaft, single Rachel,Rachel, iron pin, non-standard Screw nut,fittings,fasteners, wire forming (wire card holder, Model aircraft landing gear, S hook, R latch, triangle buckle, D buckle) and other hardware products, belonging to the copper nut series.
Brass Nut,insert nut,knurled nut,injection nut,hex nut
Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com