Summary of misunderstandings in pump mechanical seal inspection
1. The tighter the mechanical seal ring seal, the better. In fact, the dynamic ring seal is too tight and harmful. First, the wear between the seal ring and the bushing is intensified, and the leakage is premature. Secondly, the resistance of the axial adjustment and movement of the moving ring is increased. When the working condition changes frequently, the adjustment cannot be timely; thirdly, the Spring is excessively fatigued and easily damaged; It is to deform the moving ring seal and affect the sealing effect.
2. The tighter the seal ring of the static ring, the better. The mechanical seal static ring seal is basically in a static state, and the relatively tight seal effect will be better, but too tight is also harmful. First, the static ring seal is caused by excessive deformation, which affects the sealing effect. Secondly, the static ring material is mostly graphite, which is generally brittle. Excessive force is easy to cause fragmentation. Third, it is difficult to install and disassemble, and it is easy to damage the static ring.
3, the greater the amount of spring compression, the better the sealing effect. In fact, if the spring compression amount is too large, the friction pair may be sharply worn and burned instantaneously; excessive compression causes the spring to lose the ability to adjust the end face of the moving ring, resulting in seal failure.
4. The tighter the impeller lock is, the better. In mechanical seal leakage, leakage between the bushing and the shaft (interaxial leakage) is relatively common. It is generally believed that the leakage between the shafts is that the impeller locks are not locked. In fact, there are many factors causing leakage between the shafts, such as the failure of the inter-axis pads, the offset, the impurities between the shafts, and the larger shape of the shaft and the sleeve. The position error, the contact surface is broken, there is a gap between the components on the shaft, and the shaft thread is too long, which causes leakage between the shafts. Excessive locking of the lock nut will only lead to premature failure of the inter-axis pad. On the contrary, the lock nut is moderately locked, so that the inter-shaft pad always maintains a certain compression elasticity. During operation, the lock nut will automatically lock in time, so that the shaft is always in good condition. Sealed state.
5, the repair is better than not. In the event of a mechanical seal leak, it is rushed to be repaired. In fact, sometimes the seal is not damaged. It is only necessary to adjust the working condition or properly adjust the seal to eliminate the leak. In this way, it avoids waste and can verify its own fault judgment ability, and accumulates maintenance experience to improve the quality of maintenance.
6, the new is better than the old one. Relatively speaking, the effect of using a new mechanical seal is better than that of the old one, but the quality or material selection of the new mechanical seal is not appropriate. The large dimensional error will affect the sealing effect; in the polymerizable and permeable medium, the static ring is not excessive. Wear or not replace it as well. Because the static ring is in a static state for a long time in the static ring seat, the polymer and impurities are deposited as one body, which has a good sealing effect. (Source: Hebei Innovation Sealing Material Co., Ltd.)
Our main products are: packing series: carbon packing, PTFE packing, graphite packing, high water-based packing, aramid packing, PTFE split wire packing, PTFE packing, expansion PTFE packing, asbestos packing, carbon fiber packing, butter cotton yarn packing, oil-impregnated cotton packing, linseed packing, canvas reel packing, ceramic fiber packing, nylon packing, composite fiber packing, Ceramic packing, and other products.
Two: various gasket series: PTFE gasket, toothed gasket, asbestos gasket, ladle gasket, metal wound gasket, graphite gasket, high strength graphite composite gasket, PTFE gasket gasket, rubber flange Pad, asbestos manhole pad, asbestos hand hole pad, special seal ring for autoclave, asbestos flange pad, etc.
Three: rubber products: silica gel, fluorine rubber, nitrile rubber, neoprene and other special-shaped products.
Four: PTFE products series: PTFE rods, belts, membranes, mats, etc.
Five: insulation products: glass wool, rock wool, aluminum silicate, silicate, rubber, phenolic and other insulation materials.
Products are widely used in national defense, power, machinery, petroleum, chemical, metallurgy, paper, shipbuilding, transportation, aviation and other fields of the national economy. Our company wholeheartedly welcomes new and old customers to negotiate business with us by means of "quality for survival, reputation for development".
Socket Head Cap Screws,Hexagon Socket Head Cap Screw,Hexagon Socket Round Head Screw,Phillips Hex Head Screw
we enhanced the hardness of the screws by heat treatment which can efficiently prevent slip and break. With a stable and reliable quality, Lanejoy screws will be your best choice.
China Socket Head Cap Screws,Hexagon Socket Head Cap Screw,Hexagon Socket Round Head Screw,Phillips Hex Head Screw, we offered that you can trust. Welcome to do business with us.
Machine screw,tapping screw,self drilling screw,flat head screw,Pan head screw
Shenzhen Lanejoy Technology Co.,LTD , https://www.grill-grid.com