WQ high flow submersible pump is a new structure of a pump product, completely solve the single suction submersible pump axial tension, the use of mechanical seals at higher lift the shortcomings of easy to leak. Xiaobian now introduce the characteristics and conditions of use under the WQ flow submersible pump. Large flow submersible pump 1, WQ flow submersible pump Features 1, the series submersible pump, submersible motor is a submersible pump ingenious combination of submersible pump to not only have the function, but also has a double suction pump Efficient and stable operation of special performance. 2, high-lift submersible pumps can be used to achieve higher lift requirements, due to mechanical seals in negative pressure operation, with higher stability. 3. Adopting double suction structure with low water absorption. Because of adopting double-suction double-flow channel and single volute structure, the motor has no axial pulling force, which reduces and balances the radial force, greatly improves the service life of the pump by 3 times and improves Use efficiency of 15%. 4. The pump with external circulation water device can work continuously for a long time under the condition of low water level.It is equipped with self-stirring pump which has even self-stirring function.It can stir the water in the water tank to mix the sewage and dirt and discharge it with the pump. 5, WQ-type large runner anti-clogging parts design, greatly improving the ability to pass through the dirt, can effectively through the shorter fiber material and smaller diameter solid particles. 6, mechanical seal with dual series seal, made of hard decay tungsten carbide, durable, wear-resistant and so on, can make the safe operation of the pump more than 8000 hours. 7, pump oil chamber with oil-water probe, when the pump-side mechanical seal damage, the water into the oil chamber, the probe signal, the pump implementation of protection. 8, dual rail automatic coupling safety system, to the pump installation, maintenance has brought great convenience, people do not have to enter and exit the sump for this purpose. 9, the float switch according to the required changes in water level, automatic control pump stop, without special care. 10, according to the use of occasions, the motor can be used outside the cooling system, to ensure that the pump in the dry (dry) state safe operation. 11, the installation of a fixed automatic coupling installation and mobile installation of two, to meet different occasions. Second, the WQ flow submersible pump conditions of use 1, the medium temperature does not exceed 60 ℃, the density does not exceed 1.3kg / L, PH value in the range of 5 to 9. 2, submersible pump without cooling system, the motor must be submerged more than half, so as not to burn the motor. 3, under normal circumstances, the pump must be used within the scope of use to ensure that the motor is not overloaded. 4, the actual use of lift and nameplate must be similar to the head of the lift, the actual use of too low head overcurrent burning motor. Further Reading: Pumps Valves pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro-channel :) (service hotline:)
Exposed Shower System,Bathroom Shower Mixer System,Modern Bathroom Shower System,Wall Mounted Shower System
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com