How to install the baffle? Introduction to the installation of baffle

Many friends know that in order to achieve a good sound insulation effect, the installation method of the sound insulation board must be very simple, otherwise it is difficult to achieve the desired sound insulation effect. So how do you install the baffle? Let's let the decoration home decoration network Xiaobian to introduce the installation of the soundproof board for everyone, hope to bring help to your life!

Professional acoustic engineers know that if a wall is tested for soundproofing X-dB in the laboratory, it is often only soundproofed by X-2 decibels in actual engineering, and even the sound insulation effect is lower. There are two main reasons for the wall insulation value of the actual project being lower than the laboratory test value: including the lateral sound transmission problem in the actual project, and the installation quality of the wallboard in the actual project is not as good as the installation quality of the professionals in the laboratory. of.

After the installation of the preparation boom, side keel, cladding keel, bearing keel, cross keel, wall keel and other keels installed, of course, to ensure the installation quality of the keel. It is also necessary to ensure the dryness and cleanliness of the keel. When finished, remove any extras such as extra screws.

Measuring the size of the space, according to the size and structure of the room, according to the need to cut the baffle baffle baffle baffle, the purpose is to reduce the plate indirect seam. The cutting method can be selected by knife cutting and sawing. For a baffle acoustical baffle baffle with a large number of layers, it is better to use sawing because the required nick is deep. After the cutting is completed, the trimming and end must be processed to make it smooth.

The longer side of the baffle is to be perpendicular to the keel, and the shorter side is required to be staggered. After installation, fill the gap with a sealant and squeeze it properly to ensure a tight gap between the plates and the wall. After sealing, it must be fixed. For wooden keels, the thick screw of the horn is generally used. For the metal keel, the fine screw of the horn is usually used. When screwing in the screw, it is necessary to pay attention to screw it vertically so that it is flush with the surface of the baffle of the baffle of the baffle, and ensure that the baffle of the baffle of the baffle is intact.

When the baffle is installed, due to the strong permeability of the sound wave, when the hollowing treatment is performed at the position of the wall attachment such as the ceiling lamp hole, the pipe, the ceiling fan, etc., it is necessary to seal the cavity and the gap generated by the installation using the sky-like acoustic sealant.

About the installation of the sound insulation board , the decoration home decoration network Xiaobian is introduced to everyone here, I hope our introduction can bring you some help! For more related knowledge, please pay attention to the decoration encyclopedia!

Knife Gate Valve

Knife Gate Valve,Knife Gate,Knife Edge Gate Valve,Knife Edge Valve

Haogong Valve Co Ltd , https://www.haogongvalve.com