Teach you how to take care of office plastic floor

Pvc flooring, colorful, and has anti-bacterial, anti-skid, sound-absorbing, comfortable, easy to clean and so on. Like all other flooring materials, it requires proper regular maintenance after pavement. Scientific cleaning and maintenance can greatly increase its service life. As the office is where employees usually work and rest, the floor cleaning and maintenance seem to be of great importance. Therefore, Han teaches you how to take care of office plastic flooring.





1, first of all the stains on the floor thoroughly cleaned, you can use a towel several times.
2, multi-purpose cleaner, diluted with water 1:20 sprinkled on the floor, and then use a dry mop to clean.
3. After cleansing agent is cleaned up, apply 1-2 layers of strong wax. After waxing, it will take about 20 minutes. After the surface of the floor is dry, it can be stepped on after drying. These four steps are the general cleaning and maintenance methods. After a period of use, the surface of the floor becomes yellow, and it is necessary to repeatedly apply wax several times.
4, although the pvc floor fire rating is B1, but it does not mean that the floor will not be burned. Therefore, when using pvc flooring, men are not allowed to throw burning cigarettes directly on the floor to avoid damage to the floor.
5. When carrying goods inside the office building, especially when there are sharp metal objects at the bottom, do not drag on the floor so that the floor will not be scratched.
6, to avoid a lot of water stay on the floor surface for a long time, especially the sheet floor, the floor is immersed in water for a long time, the water may infiltrate the floor, the floor glue melts, loses adhesion. It is also possible to stratify the pvc floor and cause water contamination on the surface. Sewage (transparency) that penetrates into the floor can cause discoloration of the floor.

Stainless Steel Sliding Door

Characteristics and Advantages

(1) Intelligent control design: adjustable main parameter and secondary parameter automatically according to the weight of door leaves;

(2) Low noise: Special static sound track, integration of motor, worm-gear and retarder.

(3) Anti-clamping function: automatically reverse when meeting barriers;

(4) Unique electronic motor lock: the motor will lock up when the door is forced to open.(controlled by remote or switch)

(5) Tighten force: seal door when closed, power consumption approximately 10W under standby;

(6) Advanced brushless motor(36V,100W) can automatically adopt different heavy door leaves;

(7) Bi-doors inter-locking: one of the door leaves always remains closing;

(8)Safety sensor terminal: sensor stops working when door closed;

(9)Unique coating technology: never rusty;

(10)Easy and convenient to install;

(11)Working Process: when the door leaf closes to the right place, the door leaf will slightly shift to the door frame and the ground. The rubbers on the four sides of the door leaf will completely combine with door frame and ground, which ensures air tightness. When the door is open, the rubbers will separate from door frame and ground, which avoids contraction on the ground.

Technical Specification

Specification

Light Duty

Heavy Duty

Rang of the Door

Single-Leaf

Double-Leaf

Single-Leaf

Double-Leaf

Door leaf max weight

100kg

100kg x 2

200kg

200kg x 2

Mounting Method

Surface mounting or built-in mounting

Open Width

700-2000mm

650-2000mm

750-2000mm

650-2000mm

Power Supply

AC 220v ± 10%, 50-60 Hz

Opening Speed

300-500mm/s (adjustable)

Closing Speed

250-550mm/s (adjustable)

Creep speed

30-100mm/s (adjustable)

Hold-open time

0.5-20s (adjustable)

Airproof Force (Max.)

>70N

Manual Pushing Force

<100N

Electronic Lock Force

>800N

Power consumption

150W

Ambient temperature

-20+50 C

Technical Details:

(1) Rubber lining sealing technology combined with V groove on the guide rail enables the door completely sealed when the door closed;

(2)Special door body location technology. Semicircular surface beam on the ground matches with the V style groove at the bottom of door leaf, which stop the door from swing and make sure it moves stable and smooth;

(3) The door body decorated with matte stainless steel or spray surface, and on the middle and both sides with sealing stripes to ensure the hermetic effect.

(4)Feet sensor switch applied to avoid contagion;

Stainless Steel Sliding Door,Stainless Steel Bypass Sliding Door,Stainless Steel Interior Sliding Door,Stainless Steel Folding Sliding Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfhighspeeddoor.com

This entry was posted in on