Several techniques for the control of the running speed of the conveyor belt of a small mixing station The running speed of the conveyor belt of a small mixing station is generally not more than 2.5m/s. The bulky material, the material with large wear and the unloading device using the fixed pear should be used at low speed. The relationship between the diameter of the drive roller of the roller conveyor and the layer of the conveyor belt, the matching of the drive roller, the reversing roller and the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.
Avoid the belt being blocked by the frame, pillars or block materials to prevent breakage and tearing. When the conveyor belt is partially damaged, the artificial cotton should be repaired in time to avoid expansion. The feeding direction should be in the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when the material falls, the chute should be adopted to reduce the material drop distance; the conveyor belt receiving section should shorten the idler spacing and use the buffer roller as the leakage. Material, the mixing station should adopt a soft and moderate baffle plate to prevent the baffle plate from being too hard and scraping the belt surface of the conveyor belt. When the conveyor is in use, if there is no roller, it should be added and repaired in time; the roller is covered by the material, causing the rotation to be ineffective, preventing the leakage of the material between the roller and the tape, pay attention to the lubrication of the movable part of the conveyor belt, but not Oily conveyor belt.
Prevent the conveyor load from starting. If the conveyor belt runs off, it should take timely measures to correct it. It is necessary to know that the belt of the conveyor belt is uneven during the weaving process, and the conveyor belt may be deflected when the belt is loose. If the thickness of the two sides of the belt is not the same, that is, one side is thick and thin, the conveyor belt will also be biased. In the production process of the flame retardant belt, the tension will not be the same, and the small mixing station will also have a deviation. So pay attention to these issues.
Buying a small mixing station Koi Construction is your best choice. For more information, please visit our website http:// or call our toll-free hotline.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Customized Valve Balls,Solid Three Way Trunnion Valve Spheres,Hollow Three Way Valve Spheres,Steel V Opening Valve Spheres
WENZHOU ZHENHONG VALVE BALL CO., LTD , https://www.zhvalveball.com