Aluminum gussets come in many sizes, including the panel width, thickness, and height of the hem. The selection should be based on the characteristics of the bathroom at home. The aluminum gusset plate is divided into two types: punched and flat. The surface punching can be ventilated and sound-absorbing, and the inside of the gusset is covered with a film cushion. The moisture can be absorbed by the film through the punching hole, so it is most suitable for kitchens with more moisture. 600mm × 600mm microporous square plates, C150, C100 strips and 300×300, 300×600 aluminum gussets are the most widely used on the market.
The quality of the pink ceiling aluminum gusset is not thin or thin. The key lies in the texture of the aluminum. The general aluminum gusset plate is 0.8 mm or even thicker. Why? Because some engineering gussets are very long, in order to To prevent deformation, it is necessary to use a little thicker and harder. On the contrary, aluminum buckle plates for home decoration are rarely more than 4 meters, and there is no heavy object on the aluminum buckle ceiling. Therefore, the aluminum buckle plate can be said. 0.6mm is enough. So, why do you go to the building materials city, a lot of salesmen tell you about their 0.8mm, and friends say that someone introduced him to 0.88mm; it is often because their boards can't, so they can only use the thickness to be human- - It is really devastating.
Explicitly tell everyone that 0.6 mm is enough. Take the aluminum plate of an imported brand with a high reputation on the market as an example. Its price is more than 300 yuan per square meter, but what is its thickness? 0.5mm, not as good as 0.6mm! Why, the board is not good or bad. It lies in the thickness but in the substrate. In fact, if the aluminum gussets you consult are brand names, in the mid-range, most of them are 0.6 mm.
As for why some brands are 0.8 mm, they are not good. Some miscellaneous brands use cans of aluminum. Because of the quality problems of aluminum itself, they want to make the aluminum plate very thin, but it is impossible because The aluminum is not good, the board has no way to pull it evenly, so they can only do it in thick.
Therefore, in order to identify the aluminum gusset plate, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the board is uniform, and feel the elasticity and toughness by pinching the board with a hand.
The heartwood is yellow-brown and becomes red-brown with air. The sapwood is clearly demarcated. The grain is interlocked and the texture is medium.
Okan is very durable to fungi and is durable to dry wood borers; sapwood demarcated (risk limited to sapwood). Due to its high specific gravity and hardness, this species naturally covers the biological hazard class 5 (end-uses in the marine environment or in brackish water).
KelaiWood , https://www.kelaiwoodens.com