The piping configuration of the adjustable slag oil pump should be piping according to the characteristics of the construction site and the gear casting scheme. When designing the piping, it is necessary to check whether the horizontal conversion distance of the pipeline is compatible with the pumping distance of the gear pump. When adjusting the adjustable slag pump, the length of the pipeline should be shortened as much as possible, and the elbows and hoses should be used less. Pipe configuration and installation technology of adjustable pressure residual oil pump The piping configuration of adjustable pressure residual oil pump should be carried out according to the characteristics of the construction site and gear casting scheme. When designing the piping, it is necessary to check whether the horizontal conversion distance of the pipeline is pumped with the gear pump. The distance is adapted.
When adjusting the adjustable slag pump, the length of the pipeline should be shortened as much as possible, and the elbows and hoses should be used less.
The laying of the adjustable slag oil pump pipe should facilitate pipe cleaning, troubleshooting and disassembly and repair. When the new pipe is used in combination with the old pipe, Botaibang should arrange the new pipe at a higher pumping pressure.
A piping diagram should be drawn during the piping process of the adjustable slag pump, and the specifications and quantities of various fittings, pipe clamps, elbows and hoses are listed, and a list is provided. If the vertical pipe is to be vertically upward, the gear has a tendency to recirculate as the height increases, and the gear has a tendency to flow back. Therefore, a horizontal pipe of a certain length should be laid between the gear pump and the vertical pipe to ensure that the resistance gear is prevented from flowing back. When pumping high-rise building gears, it is necessary to vertically pipe upwards. At this time, the length of the ground horizontal pipe should not be less than 1/4 of the length of the vertical pipe. If the oil pipe of the above required length cannot be placed due to the limitation of the site, an elbow or hose may be used instead.
Http://news.chinawj.com.cn
Filter in air purifiers are used to reduce the concentration of contaminants (including dust, pollen, pet dander, mold spores, dust mite feces, smoke particles and volatile organic compounds) found in the environment. These contaminants can act as allergens and pose a health risk. So, air purifier is useful and even necessary for people.
Air Filter,Voc Air Filter,Air Purifier Filters,Air Filtration System
Dongguan V1 Environmental Technology Co., Ltd. , https://www.v1airpurifier.com