It is estimated that everyone will not be unfamiliar with the door hole, and many home owners have similar designs. As long as you observe carefully, you will find that in the actual decoration design, the shape of the doorway is varied and it is really dazzling. What are the common door openings? What are the methods for the construction of the portal? The following Xiao Bian made a sharing of these issues with everyone, looking forward to helping friends in need.
What are the door openings?
The figure is a European style home, so the owner uses a European style door opening. The doorway presented to us is the gorgeousness and atmosphere of European style. On both sides of this kind of doorway, Roman columns are usually used as doorposts, and arches or arch vouchers are used at the top of the doorway. The overall layout is symmetric and reflects solemnity.
What are the two door openings?
The figure is a Chinese style dwelling, in order to achieve the consistency of the overall style, the owner chose the Chinese style door openings. Under normal circumstances, Chinese-style door openings are mainly made of wood, and they are made of high-grade hardwood. Chinese-style door openings are round and elegant, mostly round or symmetric octagonal shapes. The door openings are crafted by masters of craftsmanship. Each Chinese-style door opening can be a nostalgia for the past and produce a beautiful future. Longing for. The Chinese-style doorway emphasizes the symmetry of the layout, and its soundness is correct.
What are the three door openings?
The figure is an arched door opening. It is also the most common type of door opening. Literally, we can understand it as an arched doorway. In the home improvement or housing space reconstruction, especially in the Mediterranean style, people often choose the arched doorway, or rebuild the original doorway with a square shape. Arched door hole.
Interior door hole construction method
Above we understand the shape of the doorway, surely everyone must be very curious about how they are built. The variety of interior door openings is varied and their construction methods are also different. Now we will focus on the construction method of arched door openings. In fact, the construction method of arched door openings is relatively simple. Generally, it is an artificial GRC column. The arched shape is made of wood keel and then adjusted with plasterboard. In general, everyone can take the following three approaches:
The first, commonly used method is to use the GRC method, but one point is to weld firmly, and the embedded reinforcing steel inside has a reasonable protective layer and good compactness, which is very important.
Secondly, if you want to build a safer doorway, you can use the model cast-in-place method. This is done by locking or embedding the steel in the wall, installing the arcing mold, finally pouring the cement, and releasing the mold after solidification. . With a total cost of province, one-third cheaper than GRC, fast.
The third kind, in addition to the above two methods, we can also use a new type of decorative material, the surface without any decoration, has been highly realistic stone and stone color, is a synthetic stone, can be any curve and pattern, The cost is about 20% higher than that of GRC, but it is more than half that of natural stone. The installation is made of stainless steel thread on the wall or embedded in the wall, which is the best safety and beauty.
The above is related to Xiao Bian about the shape of the door hole and the construction method of the interior door hole. Let's give you a reference! If you have more related questions, welcome to continue to pay attention to Qijia Information. We will provide more exciting content for you later.
Wafer dual plate Check Valve can be lug wafter check valve type, wafer one plate check valve type and wafer lift check valve type which widely used in all type of industrial pipelines, such as water treatment, streaming, nitric acid or strong oxidizing property working mediums. Valve size range is from 1/2"(DN15) to 48"(DN1200) matching pressure range from class 150(PN10) to class 2500(PN420). The function of wafer dual plate check valve is same as any other kind of check valve that to prevent working medium backflow and have much advantages, for example, short face to face dimension, lighter weight, lower water hammer pressure, lower fluid resistance and better sealing performance.
Wafer Dual Plate Check Valve,Wafer Check Valve,Needle Valvewafer Check Valve,Dual Plate Check Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com