Aluminium alloy doors and windows can be said to be used in the family more than one kind of doors and windows, this kind of doors and windows not only with the overall style match, but it is also a relatively durable window, although many people use, but most of the installation method for it Do not understand. The following Xiao Bian will introduce to you how to install aluminum alloy windows .
1, establish the position of doors and windows
First find out the outer door window edge at the top level, this time we will use the big line to draw down the edge of the door and window, we must remember to do a full stop at each door window. If there are some parts of the mouth that are not straight, then proceed. The horizontal position of the door window should be based on the +100cm line of the floor. Each window must be on the same horizontal line. If it is a concrete wall, its sub-frames and walls should be fixed with shot screws.
2, fixed door and window frame and edge processing
How to install the aluminum alloy window, the best between the window frame and the sub-frame is to use self-tapping screws to connect it better, between the sub-frame and the wall must remember to use cement mortar to close the leveling Caixing. After the door frame is installed, it must be tightly sealed, smooth and straight using sealant. If it is the kind of unframed, then the place where the door window frame and the hole must be fixed with a nail, each side can not be less than 2 points, we must ensure a firm job.
3, aluminum alloy door and window installation
For the installation of aluminum alloy doors and sashes, the decoration of the house was almost completed. First of all, the sash with a good memory is divided into internal fans and external fans. The first to be installed is the external fan. When it is installed, it should be inserted into the outer groove of the upper slide, and the same method can be used to install and install the internal fan. .
4, the installation of glass
How to install the aluminum alloy window, when installed, according to the size of the door, sash to carry out the material, this will only be more accurate, must meet the requirements of the corresponding regulations Caixing. Glass is in place: If it is a single piece of glass, you can use a two-handed gripping method. If the size of a single piece of glass is large, you can use a glass suction cup. Glass sealing and fixing: After the glass is in place, it is possible to insert the rubber strip into the groove to squeeze the glass, and then to inject the silicone sealant on it.
5. Cleanup work
Before handing over the aluminum alloy doors and windows, first of all, remember to tear off the plastic tape on the surface. If you leave traces on the torn surface, be sure to clean it. Doors, window frame fans, the best is the use of water or a concentration of 1% to 5% of the PH7.3 ~ 9.5 neutral detergent to clean it more appropriate, after washing with a cloth and then wipe dry.
Summary: About the installation of aluminum alloy windows and aluminum alloy door and window installation construction method introduction Related content Introduction to this, aluminum alloy windows must be installed in accordance with the steps to be done at the same time, in the installation of some of the details still have to be special note. I hope that the above introduction will help everyone.
Dongguan HengTaichang Doors Co, Ltd. , https://www.dghtcdoor.com