Many of my friends like to come now decorated with antique tiles, but every time we did not get very good for the joints antique brick beauty, aesthetics, then for us to do this antique brick beauty sew time is always very hard, our little Edited to solve the problem of the antique bricks in the end, what is the method of antique brick seams, and what are the precautions for antique bricks?
First, the introduction of antique brick beauty stitching method
1. Clean the gap: Before using the real porcelain glue, the dust in the gap of the tile should be cleaned with a vacuum cleaner, wipe the sides of the tile with a towel to remove dust, grease and other pollutants, and clean the tile with a cleaning shovel. Surface contaminants.
2, paste textured paper: If the tile is antique brick or numb brick, the beauty seam should be affixed to the textured paper, the surface brick can not be attached. When the textured paper is attached, the surface and gap of the tile should be kept clean and dry. The textured paper should be attached to both sides of the gap. In order to ensure the effect of the intersection, the horizontal and vertical line construction is recommended to be separated for 24 hours. The two sides of the textured paper should be cut neatly and without burrs, the width is not less than 2CM, the adhesion is good but the glue does not remain.
3, loading and smashing: select the real porcelain glue of the desired color, install a special mixing tube, put on a special high-quality labor-saving glue gun, squeeze and remove the front end 30g real porcelain glue, so that the real porcelain glue can be fully mixed. When sewing, the mixing tube should be as perpendicular as possible to the tile surface so that the real porcelain glue can fill the gap, and it is even when going forward. Master the strength and frequency so that the real porcelain glue flows out evenly. Suitable temperature is 5-38 degrees.
4. Squeezing seam: If you want the porcelain enamel to solidify, the surface has a moderate arc surface. You can use a special pressure-stitched steel ball to pull the brick from one end to the other end, and keep it evenly; if you want After the real porcelain glue is cured, the performance and the ceramic tile surface are as close as possible to a horizontal surface. You can use a fine squeegee or a soft rubber plate to pull the rubber seam from one end to the other end to maintain uniform force without deviating from the textured paper. Anti-pollution tile surface.
Second, the antique brick beauty seam considerations
1. Choose the joint filler material
Commonly used caulking materials are: white cement, putty powder, beautiful grout and so on. Among these materials, white cement and putty powder are traditional caulking materials, but both materials are lacking in performance. The common situation is that the effect is acceptable in a short time, but when it takes a long time, it will fall off and leak out of the gap. Moreover, the white cement and putty powder have poor water resistance, resulting in a damp place. Brick seams are particularly prone to blackening and mildew.
2, fill the seams pay attention to time
The tiles can only be caulked 24 hours after the paving is completed. This is because after the tile is laid, it is not strong enough. If the seam is inadvertent, it may cause the tile to move. In addition, premature caulking, the caulking agent is also easy to return to alkali. Since the tile construction is in the early stage of the renovation, it is easy to be dirty. Therefore, it is more appropriate to put the caulking at the end of the decoration. Of course, before the caulking, it is necessary to clean the dust and debris in the gap of the tile.
The above detailed introduction is the correct way to build this antique brick beauty joint. What are the details of our antique bricks when we are sewing, and what are the precautions during this antique brick seam, we Friends will also want to know the decoration information in the future, you can pay attention to our decoration home network.
More related wonderful reading:
What are the antique brick brands? What are the advantages of antique bricks?
What are the top ten brands of antique bricks? The advantages of the top ten brands of antique bricks
Is the antique brick? What are the advantages and disadvantages of antique bricks?
How about antique bricks? How to maintain antique bricks?
Ultra Plantâ„¢ Grow Light offers One Chip Technology aimed to meet your indoor growing expectation such as improve plants' quality, increase yield, or better the margin, etc., all for helping you realize a higher return on your crops.
Ultra Plantâ„¢ Grow Light is combined our advanced All-In-One technology with patented optical design and customized light full spectrum supported from our experienced LED engineers, plant specialists and other partners working on horticulture.
From Ultra Plantâ„¢ APP, you are able to schedule the growing process including photoperiod, brightness and spectral in advance. The lighting system will help you grow smarter, easier and better.
Ultra Plantâ„¢ is the most versatile horticultural grow lighting fixture for indoor plants with flexible full spectrum, brightness control and uniform, wider light distribution, suitable for top lighting of all types of crops. No matter it applies to anywhere for any crop, Ultra Plantâ„¢ can do perfect work for you.
Horticulture Led Grow Light,Horticulture Hlg Grow Light,Horticulture Led Grow Lights,Horticulture Lighting Group
Feton Corporation , https://www.ftplantled.com