Design Principles
(l) The design of the bathroom shall take into consideration the use of the three functions of cleaning, bathroom and toilet.
(2) The decorative design of the bathroom shall not affect the lighting and ventilation effects of the bathroom. The selection and setting of electric wires and electrical equipment shall comply with the provisions of the electrical safety regulations.
(3) The ground should be waterproof, dirty, non-slip floor tiles, granite and other materials.
(4) Smooth and elegant ceramic tiles are used on the walls, ceilings are suitable for hanging plates such as plastic plates, glass and translucent plates, and can also be decorated with waterproof paint.
(5) Baths in the bathroom should have hot and cold water taps. Bathtubs or showers should be separated by a movable partition.
(6) The floor of the bathroom should be inclined toward the drain outlet.
(7) The selection of sanitary ware should be coordinated with the overall layout.
Lighting
Lamps on the ceiling must be tightly closed, and you can also use hidden, low-voltage halogen lamps, which are better than single ceiling fluorescent lighting, but also create more interesting results. If three small spotlights are placed in the middle, they will be able to follow the dark corners of the shot and reflect the most beautiful side, covering the ugly places.
Wall light can also be used in the bathroom, but its light bulb must be completely sealed in order to avoid splashing water and getting an electric shock. In addition, the light switch has to stay away from the light itself.
use of color
The color selection of the “Three Big Parts†of sanitary ware must be the same, and the bathroom space should be designed as a whole. In general, white sanitary wares are refreshing and comfortable; ivory-yellow wares are rich and elegant; lake-green wares are natural and warm; rose-red wares are full of romantic and subtle colors.
In any case, only the three major components of sanitary ware are the main colors, echoing with the colors of the walls and the ground to enable the entire bathroom to harmonize.
Green decoration
The bathroom is a place with high humidity and temperature, which is detrimental to the growth of plants. Therefore, it must be able to choose shade-tolerant dark plants such as ferns, leaf vines, and Penglai bananas.
White tiles are often used around the bathroom, with a thick green foliage plant, more eye-catching. Place it so that soap bubbles do not splash and stain.
Ground treatment
Bathroom floor decoration should meet the following four requirements:
1. Must have better water resistance;
2. Have better drainage;
3. Have better slip resistance;
4. Also neat and beautiful.
At present, most of the floor of the family bathroom is covered with damp-proof floor tiles. The operation of the floor is more convenient. First, the cement floor is cut and washed, the floating ash is cleaned, a layer of 1:2 cement mortar is used, and some construction glue is mixed with cement. The mortar should be as smooth as possible, and then the tiles can be glued up.
Bathroom Decoration Cement Appliance Lighting Bathroom Glass Tile Bathroom Tiles Toilet Partition Whole Bathroom Toilet Design Toilet Waterproof Bathroom Floor Tiles
Brazing Carving Knives,Brazing Carving Knife,Brazing Knife,Brazing Knives
Hubei Chengze Diamod Products Co., Ltd. , https://www.ryomaltools.com