Ar Spraying up Roving for Grc

ZrO2 16.5% 2400tex AR spraying up roving for GRC,model SH13-2400 is a new environmental friendly material,specially designed as rib material for high-performance GRC(glass fiber reinforced concrete) with high integrity,designed for use in spraying systems for a GRC component.AR spraying up roving for GRC generally use manual or automatic shotcreting technique.Mainly used for GRC products,like,GRC architectural preform,GRC siding, GRC landscape products, GRC lightweight partition board, GRC insulation board, ventilation ducts, permanent tubular mandrel, permanent formwork, industrial building roof elements, sound barriers, self-hosted flooring, irrigation channels,Rome column,doorframe reinforcement,outer & internal wall reinforcement,concret floor,concrete pavers,chequered tiles,Bathroom sinks and coutertops,etc

TECHNICAL DATA SHEET:
PRODUCT PROPERTIES:
1.Alkali resistance(corrosion resistance): soaked 4 hours in 100 ºC of Ca(OH)2 saturated solution , Strength retention rate> 90%, diameter reduction ratio of <0.5%;soaked in 100 ºC 10% NaOH solution for 1 hour, weight reduction ratio (excluding sizing) <0.5%.so it can effectively resist the erosion of high-alkali of cement.
2.good integrity: fiber keep a bunch states from shotcreting,can distribute evenly on surface of GRC propducts.
3.Other properties:strong bond, high elastic modulus, impact resistance, high tensile strength, high flexural strength, non-flammable, antifreeze, temperature resistance, humidity changing ability,ant-cracking, good impermeability performance, design easiness.easy shaping.

STORAGE:
The AR spraying up roving for GRC should be keep dry in their original boxes and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.

PACKAGING:
1.Bobbin:net weight:18.00kg(more or less 1kg)
2.Composite panels wood pallet:
64bobbins/pallet,N.W:1152.kg,G.W.:1162.kg;48bobbins/pallet,N.W:864.kg,G.W.:874.kg

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(10pallets:N.W:1152.kg,G.W.:1162.kg,10pallets:N.W:864.kg,G.W.:874.kg,two layers)be loaded into 20 feet container.total net weight is 20160.00kg.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1162.00kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20pallets(10pallets:N.W:1152.kg,G.W.:1162.kg,10pallets:N.W:864.kg,G.W.:874.kg,two layers)be loaded into train's container.    ZrO2 16.5% 2400tex AR spraying up roving for GRC,model SH13-2400 is a new environmental friendly material,specially designed as rib material for high-performance GRC(glass fiber reinforced concrete) with high integrity,designed for use in spraying systems for a GRC component.AR spraying up roving for GRC generally use manual or automatic shotcreting technique.Mainly used for GRC products,like,GRC architectural preform,GRC siding, GRC landscape products, GRC lightweight partition board, GRC insulation board, ventilation ducts, permanent tubular mandrel, permanent formwork, industrial building roof elements, sound barriers, self-hosted flooring, irrigation channels,Rome column,doorframe reinforcement,outer & internal wall reinforcement,concret floor,concrete pavers,chequered tiles,Bathroom sinks and coutertops,etc

TECHNICAL DATA SHEET:
PRODUCT PROPERTIES:
1.Alkali resistance(corrosion resistance): soaked 4 hours in 100 ºC of Ca(OH)2 saturated solution , Strength retention rate> 90%, diameter reduction ratio of <0.5%;soaked in 100 ºC 10% NaOH solution for 1 hour, weight reduction ratio (excluding sizing) <0.5%.so it can effectively resist the erosion of high-alkali of cement.
2.good integrity: fiber keep a bunch states from shotcreting,can distribute evenly on surface of GRC propducts.
3.Other properties:strong bond, high elastic modulus, impact resistance, high tensile strength, high flexural strength, non-flammable, antifreeze, temperature resistance, humidity changing ability,ant-cracking, good impermeability performance, design easiness.easy shaping.

STORAGE:
The AR spraying up roving for GRC should be keep dry in their original boxes and stored in a suitable place,preferably at room temperature with 35-65% relative humidity.Avoid the sun, rain and fire.

PACKAGING:
1.Bobbin:net weight:18.00kg(more or less 1kg)
2.Composite panels wood pallet:
64bobbins/pallet,N.W:1152.kg,G.W.:1162.kg;48bobbins/pallet,N.W:864.kg,G.W.:874.kg

SHIPMENT AND TRANSPORTATION:
1.Shipment by sea:for sea transportation,generally 20pallets(10pallets:N.W:1152.kg,G.W.:1162.kg,10pallets:N.W:864.kg,G.W.:874.kg,two layers)be loaded into 20 feet container.total net weight is 20160.00kg.
2.transportation by truck:for truck transportation,generally 10 pallets(each 1162.00kg,one layer) be loaded into truck.
3.transportation by rail:for rail transportation,generally 20pallets(10pallets:N.W:1152.kg,G.W.:1162.kg,10pallets:N.W:864.kg,G.W.:874.kg,two layers)be loaded into train's container.   

Fiberglass Backing Pad

Flap Disc Backing Pad Specification:

Material: High Purity Fiberglass Cloth with Phenolic Resin

Surface: Black Paper, OEM Label

Type: T27, T28, T29.

Size: 75mm, 85mm, 90mm, 95mm, 107mm, 117mm, 140mm, 220mm

Layers: Normally it ranges from 6-12 layers, or as customers` requirements.

Feature:

1. Our Flap Disc backing pad uses stamping method, makes our fiberglass backing pad size more accurate and concentricity better

2. The flap disc backing Inspect all products, to maximize the rate of standard product

3. The fiberglass backing pad is thicker, which is beneficial to increase the synchronous consumption of the flap disc

4. The fiberglass backing pad has more micro space to make the resin deeper import, and the Sanding Belt is easier to fit on the fiberglass backing pad

5. This Nylon fiber backing pad use dense glass fiber mesh cloth, the surface of the fiberglass backing pad is more smooth and beautiful than similar products

The Fiberglass backing pad is Suitable for: Abrasive Flap Disc , Clean And Strip Disc , nylon fllap wheels,

The related abrasive products we can supply is Flap Disc Adhesive , bonded abrasives, and Buffing And Polishing products, such as Cotton Buffing Wheels and Sanding Sponge , if you have any needs about abrasive tools, please kindly feel free to contact us.

Packaging Details for Fiberglass backing plate:

1. 20-50pcs wrapped with polyethylene film,

2. 250-1000pcs into boxes or cartons

3. 20-40 cartons are packaged on one pallet.

4. Usually about 250 000-350 000pcs per 20" conainer,

about 400 000-650 000pcs per 40" conainer.

about 1 000 000 pcs per railway wagon.

Fiberglass Backing Pad,Fiber Glass Backing,fiberglass back pad for flap disc,Flap Wheel Backing Pad,fiber glass back pad

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jd-abrasives.com