Simon Lighting Lighting
â—† Living room lamp needs to be hierarchical
The choice of lighting is directly related to the overall harmony and taste of the living room space. In order to reflect a beautiful light environment, the lighting of the living room should be selected with a relatively strong artistic luminaire, which is coordinated with the interior layout. A floor lamp can be placed near the sofa to create a friendly atmosphere for friends and family. If there are audiovisual equipment such as television sets, wall lights can be installed on the side to provide the best moderate lighting for the family watching TV.
â—† bedroom lights should not be too bright
The bedroom is a place to sleep and rest, always be warm, quiet and comfortable. You should try to avoid dazzling lighting or use unusually complicated lamps, but the lights should not be too dark to create a sense of depression. There should be a hanging ceiling light in the bedroom, such as a long incandescent lamp on the roof. In order to make the light just right, you can also put a layer of white light transparent enamel under the lamp to soften the intense lighting and make the room look full of mood. The switch of the light should be separately controlled and grouped, installed in the place where the door can reach, in order to facilitate turning on the light in the shortest time.
â—† Study room lamp function
The environment of the study should be elegant, simple, and clear. In addition to reading and writing, the current study also has other modern tools such as computers. Therefore, the study must have a high illuminance value and a quiet light environment. Therefore, in the study room, simple main lighting should be ensured. Single-cable chandeliers or fluorescent lamps can be used. The location is decided according to the specific conditions of the room. A small spotlight can be installed in the bookcase. This lighting not only helps identify the title, but also Keep the temperature to prevent the books from getting wet and oxidized.
â—†kitchen for diffuse light
The kitchen is the home "studio", and the brighter scattered light can make the kitchen more spacious and tidy. The kitchen usually uses a ceiling or chandeliers for general lighting, and an embedded or semi-embedded diffused ceiling lamp is set above the console. Taking into account the relatively heavy kitchen smoke and water vapor, compared with other room lamps, the kitchen lamp may often need to take apart and wash, so it should be as simple as possible, the lamp material is also better than plastic and glass, to facilitate cleaning. If the kitchen also serves as a restaurant, the light source should use warm incandescent lamps.
Links: Energy-saving lamps do not save energy
There are six principles to be chosen for safe and beautiful lamps
Lighting Selection NVC Lighting Brand Lighting Room Living Room TV Lighting TV Decoration Living Room Lamp Bedroom Lamp Decoration Living Room Function Sofa Bed Cloth Sofa Glass Door Computer Armchairs Floor Lamp Function Sofa Kitchen Glass Sliding Door Small Study Studio Study Bedroom Bedroom Lamp
One of the most fascinating materials of our time is polycrystalline cubic boron nitride PCBN - the second hardest material after diamond. At CeramTec, PCBN is used as a cutting material from which indexable inserts are manufactured for machining.
PCBN is produced synthetically and is a "composite material" made of cubic boron nitride and a mostly ceramic binder phase. The ratio of cBN to binder content and the cBN grain size determine the application.
PCBN cutting materials are used in the machining of hard and/or highly abrasive workpiece materials. The high hardness and the extremely high hot hardness (up to temperatures above 1,000°C), the edge stability and inertness towards ferrous materials as well as the basically good chemical resistance give CBN cutting materials a high potential for use in machining. On the cutting material side, a distinction is made between high- and low-cBN cutting material grades.
PCBN (Polycrystalline Cubic Boron Nitride) blanks for cutting tools are composite ultrahard materials sintered by polycrystalline CBN and carbide alloy under ultra-high pressure and high temperature conditions. They combine the hardness, wear resistance, and thermal stability of CBN with the impact resistance and toughness of carbide alloy. PCBN blanks are highly suitable for cutting ferrous and non-ferrous metals with high hardness.
PCBN Composites and Inserts
Hans Super Abrasive Diamond Tool Co.,Ltd , https://www.hansuperabrasive.com