The 3C mark identification method in safe purchase is:
1, generally in the upper right corner of the safe has a "CCC" 3C standard! Remember to destroy the 3C logo.
2, 3C logo is white, black pattern.
3. The "S, EMC, S&E" on the left side of the word "CCC" is dark red under fluorescence. If you look closely at the "CCC" pattern, you can also find multiple diamond-shaped small "CCC" marks.
4, see the random number. This is where the "CCC" logo is least likely to be counterfeited. Each mandatory product certification mark has a unique code. When issuing the compulsory product certification mark, the certification mark issuance management center has entered the product corresponding to the code into the computer database, and the consumer can query the code through the mandatory product certification mark anti-counterfeiting query system of the CNCA.
About 3C certification:
Through the General Administration of Supervision, Inspection and Quarantine and the National Certification and Accreditation Regulatory Commission, the 3C logo issued is also known as China Compulsory Certification, which is abbreviated as "CCC" in English. Products that have passed China's compulsory certification have become 3C certified products. The "CCC" mark is attached to the product. All products that are listed in the compulsory product certification list must be certified by the certification body designated by the state. After obtaining relevant and additional certification documents, they can be shipped, imported, sold, and used in business service facilities. The steel plate of the safe is produced under the supervision of the state, with a height of 45 cm or more, a door panel of 10 mm and a box of 6 mm. The 45 cm or less (including 45 cm) door panel is 8 mm and the cabinet is 4 mm.
What kind of safe can pass 3C certification?
1. The CCC mark must be affixed to the safe box, and it must meet the national compulsory certification standards and be subject to compulsory certification. Only the CCC mark can be affixed to the box. 2. The national standard is followed, and the safe materials must be high-quality steel. The steel thickness of the door panel must reach 8~10mm and the box thickness must reach 6mm or more.
3, safe (box) in the door plate door locks, password locks, handles and other key parts of the national standard requires the use of hardness to achieve HRC550 anti-drilling function of the anti-drilling board to give effective protection. The door gap is tight and does not exceed 2mm; the anti-destructive capability (including the two detection indexes of anti-opening capacity and anti-opening door capacity) should be more than 60 minutes.
4, the choice of high-quality steel, but also to prevent easy to easily remove the safe, the safe itself is relatively heavy, or with a fixed attachment, it is difficult to move.
5, safes are required to obtain a national compulsory certification and affixed with the CCC logo safe and with product quality insurance.
Want to learn more about the knowledge of the safe, all in the Chinese safe exchange network.
Photoresist Chemical,Cas 5001-18-3,1 3-Adamantanediol 5001-18-3,5001-18-3 99% In Stock
HENAN BON INDUSTRIAL(CHEMICAL) CO.,LTD , https://www.bonchemical.com