The working principle of the fan is to input electric power, and the fan impeller is rotated by the motor to generate suction or exhaust air.
In the case of a wind turbine used in a factory, it is generally used for ventilation in a factory environment or exhaust gas treatment from a factory process.
If the environment is ventilated, if the environmental requirements are not strict, install the fan to connect the power supply, and use the switch to control it. If the requirements are strict, it must be matched with the central air conditioner to achieve the third-level filtration. Generally, the air conditioner is selected. The fan fan is used to replenish the fresh air. The fan cover is equipped with a filter. The cold coil can be installed in the air-conditioning box or the pipe outside the air-conditioning box to achieve the function of the air conditioner. The operating rules are mainly considering the air volume, taking into account the air-conditioning temperature and The ratio of ventilation and air supply is to avoid wasting energy.
If it is the process exhaust gas treatment, it must be operated with the exhaust gas treatment equipment. There are some electrical components on the exhaust gas treatment equipment, such as water pumps, instruments, valves, etc., which have successively started.
Concerned about surprises
Label: Working principle and operating procedures of the fan used in the factory
Previous: Installation and use of pneumatic diaphragm pump Next: Several problems should be paid attention to when running screw air compressor
Mono Calcium Phosphate ,the chemical formula is Ca (H2PO4)2.H2O, molecular weight of the body is 252.06, after dryed the product is white or slightly yellow micro powder or granules, the relative density of 2.22 (16 °C). Slightly hygroscopic, soluble in hydrochloric acid, nitric acid, slightly soluble in cold water, almost insoluble in ethanol. At 30 °C, 100 ml of water soluble MCP 1.8g. The aqueous solution was acidic, heating the aqueous solution can get calcium hydrogen phosphate. Lose crystal water at 109 °C and decomposed into calcium metaphosphate at 203°C. Applications:Monocalcium Phosphate is used to supply mineral nutrition such as phosphorus (P) and calcium (Ca) for animal, which can be easily digested and absorbed. Extensively applied as additives of Phosphorous and Calcium in aquatic animals feed.Higher water solubility of MCP is required in aquatic animals feed.
Monocalcium Phosphate (MCP)
Monocalcium Phosphate,Mcp Feed Grade,Monocalcium Phosphate Powder,Monocalcium Phosphate Granular
MIDI FEED BIOTECH LIMITED , https://www.midifeed.com