On June 12, 2007, the Superhard Materials Branch held an expansion meeting of three executive directors in Xining. The main agenda of the meeting is as follows:
1. Communicate the spirit of the meeting of the Secretary-General of the General Conference and announce the results of the selection of the “Five Top Ten Enterprises†of the 2006 General Conference;
2. Review the summary of the work of the club in 2006;
3. Review the 2007 work plan and recent work arrangements of the club;
4. Adjust the units above the directors;
5. To inform the industry about the economic performance in 2006 and the development forecast for 2007.
6. Special lectures. The number of delegates attending the meeting was 57, including 21 directors, deputy directors, and representatives of standing directors, 26 members of the board of directors, members of the committee of experts, and representatives of invited lecturers, and 10 staff members and other representatives. Excluding the new materials division of Kunshan Sany Heavy Machinery Co., Ltd., Zigong Cemented Carbide Co., Ltd. and East China Superhard Materials Research Institute, which are no longer producing industrial products, Xinzheng Electric Carbon Factory, Taishan Machinery Factory, Liuzhou, Guangxi Huadi Prospecting Machinery Factory, etc., due to market changes, the output of the industry products has shrunk significantly and the units that have been actively required to downgrade to the general membership should be represented by the standing director (including the above-mentioned level units), 28 to 21, which is more than 2/3. On behalf of the quorum of the meeting, the resolution of the meeting is legal and valid.
The meeting was chaired by the chairman of the board of directors and director of Zhengzhou Sanmao, Zhu Feng. The secretary-general Li Zhihong gave a report to the representatives on 1, 2 and 3 issues. In conveying the spirit of the meeting of the Secretary-General of the General Conference, he introduced the whole meeting, focusing on the work of the General Assembly after a lot of detailed work, prompting the State Council to issue "Several Opinions on Accelerating the Revitalization of Equipment Manufacturing Industry" with official documents, and approved the total It will assist the National Development and Reform Commission to prepare the "Special Plan for the Development of CNC Machine Tools". The State Council established the leader of the National Development and Reform Commission Ma Kai as the leader, the deputy director of the National Development and Reform Commission and the director of the State Council's revitalization of the Northeast Office, Zhang Guobao, the deputy director of the Ministry of Science and Technology Ma Yude, and the vice minister of education Zhao Zhaoping. The deputy leader, the Ministry of Finance, the National Defense Science and Technology Commission, the Chinese Academy of Sciences, the Engineering Institute and other leaders are members of the "high-end CNC machine tools and basic manufacturing equipment major special leading group", the General Assembly also hosted the National Development and Reform Commission and the National Defense Science and Technology Commission held the military industry Domestic CNC machine tool application forum, and so on.
The promotion and hosting of major projects and major events fully demonstrated the tremendous efforts and significant contributions made by the General Conference for the development of the industry, fully reflecting the high level of work strength of the General Conference, which is rare in general industrial associations, not to mention A club like us! As a supporting tool for CNC machine tools and major equipment, the industry should actively seek opportunities in the special machine for numerical control machine tools and contribute to national construction. In summing up the work of the club in 2006, he made a summary of the three aspects:
1. Completed the tasks assigned by the General Conference in a comprehensive and complete manner, and completed the CCMT2006 group and the five top ten enterprises and machinery industry science and technology progress awards. Among the top ten top ten companies, only 16 companies in the small industry under the jurisdiction of the 26 clubs are listed. It is not easy to be listed on the annual rankings. It also explains the performance of the club work from one aspect. My club won 2006. Among the top ten enterprises of the year: Huanghe Cyclone Company won two top ten products sales revenue and foreign exchange earning; Fu Nike won the top ten comprehensive economic benefits; Zhengzhou Sanmao won the top ten brand activities; in addition, Huanghe Cyclone Company and Nanyang The top ten enterprises of Zhongnan Company's meticulously created brand activities have passed the review and are still valid. In terms of organizational construction, in 2006, 75 member units were cleared and 9 new member units were recruited to ensure the vitality of the club.
2. The club activities were rich and varied. After the joint efforts of the clubs, the mechanical and electrical chambers of commerce and the responding companies, we won the victory of the US anti-my diamond circular saw blade dumping case. Taking this opportunity, the branch established an anti-dumping early warning team. In order to regulate the competition order, the top three heads of diamond production and their heads of marketing were organized to discuss marketing strategies, stabilize product sales prices, and achieved good results. The club held an executive director expansion meeting and an industry development forum to organize and coordinate the superhard abrasive standard revision and inspection of the North Korean market once, and organized a delegation to participate in the American Diamond International Conference. To help companies participate in relevant exhibitions in Germany and Japan, the club activities have been very successful and have achieved remarkable results, contributing to the healthy development of the industry.
3. Branch statistics, information materials and publicity work, the 2006 chapter secretariat edited and published "China Superhard Materials", "Abrasive Abrasives Newsletter", "Abrasive Abrasives Industry Yearbook", "Superhard Materials Development Forum Proceedings" Waiting for 19 volumes of book materials, more than 2.5 million words, not only promoted the work of the association, but also transmitted a lot of information to the member units. China Superhard Materials Network has become the authoritative professional portal of the industry, with the most complete materials and richest content. The publicity associations are working in the most timely manner, and are attracting more and more domestic and foreign merchants to log on to this website. Because of the outstanding performance of this club, it was named the 2006 Advanced Branch. In reporting on his 2007 work plan, he emphasized that he should work on the main points of the 2007 work of the General Conference and fully complete the tasks assigned by the General Conference; continue to carry forward the fine traditions of the club, continue to carry out rich and colorful activities, and continue to do a good job of statistics. Editing and publishing work such as information materials, continue to play a good role as a “bridge†and a “linkâ€, and make new contributions to the development of the industry (for details, see “China Superhard Materialsâ€, Issue 49).
At the meeting, the additional directors of the above-mentioned units made a secret ballot after the briefing of the candidate to introduce the candidates. The members of the various institutions were elected as follows: two additional deputy directors: Shijiazhuang Boshen Tools Group Co., Ltd. and Henan Huajing superhard materials. Co., Ltd.; 4 additional standing directors: Beijing Antai Steel Research Superhard Materials Co., Ltd., Wuhan Wanbang Laser Diamond Tools Co., Ltd., Guangdong Benlang Superhard Materials Co., Ltd., Shanghai Zhongyu Industrial Diamond Co., Ltd.; Five units: Fujian Wanlong Diamond Tools Co., Ltd., Quanzhou Zhongzhi Diamond Tools Co., Ltd., Foshan Ditiantai New Material Technology Co., Ltd., Xiamen Linguang Industry and Trade Co., Ltd., Zhengzhou Superhard Materials Industrial Park. The above units can be supplemented as members of the association's leading institutions, indicating that these units have achieved remarkable results in structural adjustment, have greater influence in the industry, can lead and guide and have made great contributions to the healthy development of the industry; It also shows that these companies are enthusiastic about the industry and are willing to assume more obligations and responsibilities for the development of the industry. I hope that these units will make greater contributions to the common progress of industry enterprises while continuing to do their work in the future.
In the latter part of the meeting, the Secretary-General focused on the “super-hard materials industry that steadily advanced in product structure adjustment†and based on the 2006 industry statistics, analyzed the economic performance of the industry in 2006 and predicted the development of the industry in 2007. He said that in 2006, the growth rate of industrial products (13.3%) slowed down (the increase rate decreased by 13.21%), and the efficiency (the total profit increased by 14.94%) increased (the annual growth rate increased by 14.6%). The international competitiveness of diamonds increased significantly, and the export situation was very good. China has been able to produce the world's top saw-grade diamonds, and has completed the single goal of King Kong R&D in the first year of the 11th Five-Year Plan. When talking about the development of the industry in 2007, through the analysis of the objective economic situation and the development situation of the industry at home and abroad (for details, please refer to “China's Superhard Materials Total 50â€), it is predicted that the growth rate of total industrial output value in 2007 will reach 15 ~20%, or even higher, far higher than the national GDP growth target of 8%; total profit growth rate will reach 10~15%, slightly lower than the total output growth rate, because energy transportation continues to increase prices, the main raw materials continue Price increases, environmental protection inputs and rising wages of workers have caused increased costs. Subsequently, Wang Yuchang, chief engineer of the Yellow River Cyclone, reported on “Industrial Synthesis of Large Single Crystal Diamondsâ€. Lu Zhi, Dean of the Guilin Mines Institute, reported on the development and application of high-grade diamond tools. Fu Yucan, a professor at Nanjing University of Aeronautics and Astronautics, reported Brazing super-hard abrasive tool technology and its application in high-efficiency precision machining of difficult-to-machine materials," Jiang Rongchao, professor of Changsha Mining Research Institute, reported on "the development of oil-hard and super-hard composite tools for mines and ways to improve their quality", Antai Steel Liu Yibo, chief engineer of the research company, reported on the "Introduction to European OSA certification". Dong Changshun, chief engineer of Beijing Tiandi Dongfang Co., Ltd. reported on the progress of CVD diamond. Chen Yigong, deputy chief engineer of Zhengzhou Sanmao, reported the pressure and temperature of the six-face press. And precise control of power." The above reports will be published in the association's "China Superhard Materials".
The meeting was successfully concluded after the successful completion of the various agendas.
Li Li 2007.6.19
1. Communicate the spirit of the meeting of the Secretary-General of the General Conference and announce the results of the selection of the “Five Top Ten Enterprises†of the 2006 General Conference;
2. Review the summary of the work of the club in 2006;
3. Review the 2007 work plan and recent work arrangements of the club;
4. Adjust the units above the directors;
5. To inform the industry about the economic performance in 2006 and the development forecast for 2007.
6. Special lectures. The number of delegates attending the meeting was 57, including 21 directors, deputy directors, and representatives of standing directors, 26 members of the board of directors, members of the committee of experts, and representatives of invited lecturers, and 10 staff members and other representatives. Excluding the new materials division of Kunshan Sany Heavy Machinery Co., Ltd., Zigong Cemented Carbide Co., Ltd. and East China Superhard Materials Research Institute, which are no longer producing industrial products, Xinzheng Electric Carbon Factory, Taishan Machinery Factory, Liuzhou, Guangxi Huadi Prospecting Machinery Factory, etc., due to market changes, the output of the industry products has shrunk significantly and the units that have been actively required to downgrade to the general membership should be represented by the standing director (including the above-mentioned level units), 28 to 21, which is more than 2/3. On behalf of the quorum of the meeting, the resolution of the meeting is legal and valid.
The meeting was chaired by the chairman of the board of directors and director of Zhengzhou Sanmao, Zhu Feng. The secretary-general Li Zhihong gave a report to the representatives on 1, 2 and 3 issues. In conveying the spirit of the meeting of the Secretary-General of the General Conference, he introduced the whole meeting, focusing on the work of the General Assembly after a lot of detailed work, prompting the State Council to issue "Several Opinions on Accelerating the Revitalization of Equipment Manufacturing Industry" with official documents, and approved the total It will assist the National Development and Reform Commission to prepare the "Special Plan for the Development of CNC Machine Tools". The State Council established the leader of the National Development and Reform Commission Ma Kai as the leader, the deputy director of the National Development and Reform Commission and the director of the State Council's revitalization of the Northeast Office, Zhang Guobao, the deputy director of the Ministry of Science and Technology Ma Yude, and the vice minister of education Zhao Zhaoping. The deputy leader, the Ministry of Finance, the National Defense Science and Technology Commission, the Chinese Academy of Sciences, the Engineering Institute and other leaders are members of the "high-end CNC machine tools and basic manufacturing equipment major special leading group", the General Assembly also hosted the National Development and Reform Commission and the National Defense Science and Technology Commission held the military industry Domestic CNC machine tool application forum, and so on.
The promotion and hosting of major projects and major events fully demonstrated the tremendous efforts and significant contributions made by the General Conference for the development of the industry, fully reflecting the high level of work strength of the General Conference, which is rare in general industrial associations, not to mention A club like us! As a supporting tool for CNC machine tools and major equipment, the industry should actively seek opportunities in the special machine for numerical control machine tools and contribute to national construction. In summing up the work of the club in 2006, he made a summary of the three aspects:
1. Completed the tasks assigned by the General Conference in a comprehensive and complete manner, and completed the CCMT2006 group and the five top ten enterprises and machinery industry science and technology progress awards. Among the top ten top ten companies, only 16 companies in the small industry under the jurisdiction of the 26 clubs are listed. It is not easy to be listed on the annual rankings. It also explains the performance of the club work from one aspect. My club won 2006. Among the top ten enterprises of the year: Huanghe Cyclone Company won two top ten products sales revenue and foreign exchange earning; Fu Nike won the top ten comprehensive economic benefits; Zhengzhou Sanmao won the top ten brand activities; in addition, Huanghe Cyclone Company and Nanyang The top ten enterprises of Zhongnan Company's meticulously created brand activities have passed the review and are still valid. In terms of organizational construction, in 2006, 75 member units were cleared and 9 new member units were recruited to ensure the vitality of the club.
2. The club activities were rich and varied. After the joint efforts of the clubs, the mechanical and electrical chambers of commerce and the responding companies, we won the victory of the US anti-my diamond circular saw blade dumping case. Taking this opportunity, the branch established an anti-dumping early warning team. In order to regulate the competition order, the top three heads of diamond production and their heads of marketing were organized to discuss marketing strategies, stabilize product sales prices, and achieved good results. The club held an executive director expansion meeting and an industry development forum to organize and coordinate the superhard abrasive standard revision and inspection of the North Korean market once, and organized a delegation to participate in the American Diamond International Conference. To help companies participate in relevant exhibitions in Germany and Japan, the club activities have been very successful and have achieved remarkable results, contributing to the healthy development of the industry.
3. Branch statistics, information materials and publicity work, the 2006 chapter secretariat edited and published "China Superhard Materials", "Abrasive Abrasives Newsletter", "Abrasive Abrasives Industry Yearbook", "Superhard Materials Development Forum Proceedings" Waiting for 19 volumes of book materials, more than 2.5 million words, not only promoted the work of the association, but also transmitted a lot of information to the member units. China Superhard Materials Network has become the authoritative professional portal of the industry, with the most complete materials and richest content. The publicity associations are working in the most timely manner, and are attracting more and more domestic and foreign merchants to log on to this website. Because of the outstanding performance of this club, it was named the 2006 Advanced Branch. In reporting on his 2007 work plan, he emphasized that he should work on the main points of the 2007 work of the General Conference and fully complete the tasks assigned by the General Conference; continue to carry forward the fine traditions of the club, continue to carry out rich and colorful activities, and continue to do a good job of statistics. Editing and publishing work such as information materials, continue to play a good role as a “bridge†and a “linkâ€, and make new contributions to the development of the industry (for details, see “China Superhard Materialsâ€, Issue 49).
At the meeting, the additional directors of the above-mentioned units made a secret ballot after the briefing of the candidate to introduce the candidates. The members of the various institutions were elected as follows: two additional deputy directors: Shijiazhuang Boshen Tools Group Co., Ltd. and Henan Huajing superhard materials. Co., Ltd.; 4 additional standing directors: Beijing Antai Steel Research Superhard Materials Co., Ltd., Wuhan Wanbang Laser Diamond Tools Co., Ltd., Guangdong Benlang Superhard Materials Co., Ltd., Shanghai Zhongyu Industrial Diamond Co., Ltd.; Five units: Fujian Wanlong Diamond Tools Co., Ltd., Quanzhou Zhongzhi Diamond Tools Co., Ltd., Foshan Ditiantai New Material Technology Co., Ltd., Xiamen Linguang Industry and Trade Co., Ltd., Zhengzhou Superhard Materials Industrial Park. The above units can be supplemented as members of the association's leading institutions, indicating that these units have achieved remarkable results in structural adjustment, have greater influence in the industry, can lead and guide and have made great contributions to the healthy development of the industry; It also shows that these companies are enthusiastic about the industry and are willing to assume more obligations and responsibilities for the development of the industry. I hope that these units will make greater contributions to the common progress of industry enterprises while continuing to do their work in the future.
In the latter part of the meeting, the Secretary-General focused on the “super-hard materials industry that steadily advanced in product structure adjustment†and based on the 2006 industry statistics, analyzed the economic performance of the industry in 2006 and predicted the development of the industry in 2007. He said that in 2006, the growth rate of industrial products (13.3%) slowed down (the increase rate decreased by 13.21%), and the efficiency (the total profit increased by 14.94%) increased (the annual growth rate increased by 14.6%). The international competitiveness of diamonds increased significantly, and the export situation was very good. China has been able to produce the world's top saw-grade diamonds, and has completed the single goal of King Kong R&D in the first year of the 11th Five-Year Plan. When talking about the development of the industry in 2007, through the analysis of the objective economic situation and the development situation of the industry at home and abroad (for details, please refer to “China's Superhard Materials Total 50â€), it is predicted that the growth rate of total industrial output value in 2007 will reach 15 ~20%, or even higher, far higher than the national GDP growth target of 8%; total profit growth rate will reach 10~15%, slightly lower than the total output growth rate, because energy transportation continues to increase prices, the main raw materials continue Price increases, environmental protection inputs and rising wages of workers have caused increased costs. Subsequently, Wang Yuchang, chief engineer of the Yellow River Cyclone, reported on “Industrial Synthesis of Large Single Crystal Diamondsâ€. Lu Zhi, Dean of the Guilin Mines Institute, reported on the development and application of high-grade diamond tools. Fu Yucan, a professor at Nanjing University of Aeronautics and Astronautics, reported Brazing super-hard abrasive tool technology and its application in high-efficiency precision machining of difficult-to-machine materials," Jiang Rongchao, professor of Changsha Mining Research Institute, reported on "the development of oil-hard and super-hard composite tools for mines and ways to improve their quality", Antai Steel Liu Yibo, chief engineer of the research company, reported on the "Introduction to European OSA certification". Dong Changshun, chief engineer of Beijing Tiandi Dongfang Co., Ltd. reported on the progress of CVD diamond. Chen Yigong, deputy chief engineer of Zhengzhou Sanmao, reported the pressure and temperature of the six-face press. And precise control of power." The above reports will be published in the association's "China Superhard Materials".
The meeting was successfully concluded after the successful completion of the various agendas.
Li Li 2007.6.19
Steel Strips,Sus304 Steel Strips,Steel Strip For Piston Ring,Carbon Steel Wire Steel Strip
Ningbo Yunsheng Elastic Components Co.,Ltd , https://www.yunshengsprings.com