Status: Industrial status is important
The reporter yesterday obtained a "China New Materials Industry Development Report (2008)" (hereinafter referred to as the report), which was just prepared by the National Development and Reform Commission and the China Society for Materials Research. In the report, Zhang Xiaoqiang, deputy director of the National Development and Reform Commission, said that the development of the new materials industry plays an important supporting role in the development of information, biology, aerospace and new energy industries.
Liu Feng believes that compared with traditional mineral resources, new materials are more environmentally friendly and energy efficient, and more in line with sustainable development strategies.
“Materials are the mother of industry.†Wan Rong, director of the Beijing New Materials Development Center, said that many high-end industries need to use new materials with specific energy. Without the development of new materials, the current structural adjustment, especially the manufacturing upgrade, is impossible. He believes that new energy depends on new materials, so new materials, especially high-end key materials, need to be supported so as not to be subject to people in the future. “High-end materials are very obvious for the industry.†Wan Rong said that although the scale of new materials is not as large as traditional materials, once the technology breakthroughs, its industrial impact will be decisive.
According to industry analysts, the central government began to focus on the new materials industry is also based on the current rapid development of the industry. Liu Feng preliminary statistics, the current state-level new material parks, industrial bases more than 50. According to data provided by Wanrong, as of the end of last year, the number of new materials companies in Beijing was about 1,300, and the sales revenue in that year was nearly 70 billion. “New materials have become the fourth largest high-tech industry in Beijing.â€
Prospects: Many capitals are optimistic
According to the "Report", the market growth rate of China's new materials industry will continue to remain above 20% in the future. The market size of China's new materials industry will reach 82.37 billion in 2010, and will exceed 130 billion in 2012. Such a beautiful future will naturally accelerate the speed at which many capitals enter the industry and expand.
Liu Feng revealed that since last year, some large consortia and VCs have approached him, hoping to find suitable new materials projects. At present, there are already some negotiations. “Funding is not a problem, they value long-term benefits.â€
In the past two years, many investment institutions have adjusted their strategies and set up a new material investment group. Wan Rong said that foreign capital and private capital are paying more and more attention to the new materials industry. The Beijing New Materials Development Center also established a new material investment and financing club last year, and currently has 30 members. With the opening of the GEM, more and more new materials companies also want to obtain development funds through the capital market. According to Wan Rong, they have completed investigations on 10 new materials companies, and the next stage will promote several of them to land on the GEM.
Policy: need targeted support
The industry believes that if the central government wants to support the development of the new materials industry, its policies need to be more targeted.
It is understood that the new materials industry includes electronic information materials, new energy materials, aerospace materials, new building materials and other dozens of categories and many small categories. "The new materials industry is too scattered, and we can't do everything." Wan Rong believes that it can be supported by the two major blocks of new energy materials and environmentally friendly materials, which is also in line with the current mainstream of energy conservation and environmental protection.
At the same time, the industry hopes that the policy will be more inclined to the SMEs in the new materials industry. It is understood that most of the new materials companies are not large, and there are only about 10 listed companies among the 1,300 companies in Beijing. “More than 80% of new materials companies in China are small and medium-sized.†Wan Rong said that new materials companies are also typical high-tech enterprises with small scale and high added value, which is similar to other high-tech companies. Problems such as poor financing channels and unsatisfactory combination of production, study and research. Wan Rong believes that the solution is still to be promoted by the relevant departments to build a sound technology financial service system.
The current situation of the industrial park blossoming must also be taken seriously. Liu Feng said that in some areas, the scientific research strength is insufficient and the industrial chain is incomplete. The foundation for building a new material industrial park is very weak, but it is barely launched for regional interests.
We can manufacture various shape and special material optical lens.The coating for lenses not only the normal BBAR coating,but also including dichroic coating and super broad band antireflective coating.
Plano-Convex (PCX) Lenses have a positive focal length, making them ideal for collecting and focusing light in imaging applications. They are also useful in a variety of applications involving emitters, detectors, lasers, and fiber optics. Coated versions have optimum light transmission. Available in a wide variety of diameters and focal lengths.
The uncoated lenses are ideal for a multitude of optics and photonics applications, as well as biotech instruments such as DNA sequencers and polymerase chain reaction (PCR) testing platforms.
The coated lenses can be utilized in a host of optics and photonics applications, including biotech instruments such as DNA sequencers and polymerase chain reaction (PCR) testing platforms.
Plano-convex Spheric Lens
Specification of our plano-convex spherical lenses as follow:
*Material:Bk7,fused silica,CaF2,MgF2,BaF2,ZnSe infrared optical crystals.
*Focal length:+/-1%
*Length tolerance:+0.0 - -0.1mm
*Width tolerance:+0.0 - -0.1mm
*Center thickness tolerance:+/-0.1mm
*Surface Figure:lambda/2 at 633nm on plano side
*Surface quality:60-40 stratch/dig
*Clear Apenture>90%
*Chamfer:0.25mm at 45 degree typical
*Coating:optional
Plano-Convex Spherical Lens,Plano-Convex Lenses,Plano-Convex Lens Kit,Inked Plano-Convex Lens
China Star Optics Technology Co.,Ltd. , https://www.opticsrealpoo.com