What is the bearing fatigue pitting

Bearing fatigue pitting is due to overload work of the engine, making the bearing overheating and bearing clearance is too large, causing the central bearing fatigue damage, fatigue, pitting corrosion or fatigue. Most of this damage is due to overload, bearing clearance is too large, or unclean lubricating oil, mixed with foreign matter inside. Therefore, the use should be taken to avoid overload bearing work not too low or too high speed operation; idling engine to be adjusted to a steady state; to ensure normal bearing clearance to prevent the engine speed is too high or too low; check and adjust the cooling System work, to ensure that the engine operating temperature appropriate.

BaF2 Window

Barium Fluoride (BaF2) Windows can be used in a variety of applications, such as infrared spectroscopy, due to their wide broadband transmission that extends from the deep ultraviolet to the long-wave infrared.

Barium Fluoride Window/BaF2 window
Barium Fluoride (BaF2) Windows can be used in a variety of applications, such as infrared spectroscopy, due to their wide broadband transmission that extends from the deep ultraviolet to the long-wave infrared. Barium fluoride`s low index of refraction of 1.48 provides high transmission without the need for anti-reflection coatings. Barium fluoride windows can be used up to 800°C in a dry environment, but prolonged exposure to moisture can degrade transmission in the vacuum ultraviolet range. While barium
fluoride windows are less resistant to water than calcium fluoride, BaF2 windows are the most resistant optical fluoride to high-energy radiation, but feature lower UV transmittance. BaF2 has a Knoop hardness of 82.

  • Excellent Transmission from 200nm - 12μm
  • Resistant to High-Energy Radiation
  • Provide High Transmission without AR Coatings
BaF2 window


BaF2 window

Baf2 Window,Optical Baf2 Window,Barium Fluoride Windows,Single Crystal Baf2 Lens

Changchun Ruiqi Optoelectronics Co.,Ltd , https://www.ruiqi-optics.com

This entry was posted in on