Material: wear-resistant alloy Features: good wear resistance, large flow passage, easy to operate Uses: pumping sand, mud, fly ash, solid powder particles Alias: Submersible pumping sand pump, submersible sand pump, Submersible mud pump Product Overview: ZJQ submersible sand suction pump is the motor and pump co-submersible underwater work, the pump flow components using high alloy wear-resistant materials, has good wear resistance, large flow passage, for In the transport of large solid particles containing sediment, pulp, coal slurry, sand and other media .. This series of products designed and manufactured by absorbing advanced technology at home and abroad, a unique sealing device can effectively balance the pressure inside and outside the oil chamber to maximize the protection of the machinery Sealed reliability, motor overheating protection, water testing and protection of a variety of protection measures, to the long-term safe operation under harsh working conditions. Pump front impeller impeller can sediment deposition into a high concentration of turbulence, the pump without attachments to achieve high concentrations of silt deposition. Structural features: 1. The whole machine is a dry type pump, the motor oil chamber sealed, equipped with mechanical seals, can effectively prevent high-pressure water and impurities into the motor cavity. 2. In addition to the main impeller, there are mixing impeller, sediment can be precipitated in the bottom of the mud stirred into a turbulent flow out. 3. impeller and impeller impeller and other flow components using high-hardness high-chromium steel, wear-resistant, corrosion-resistant, sewage capacity, through the larger solid particles. 4. The motor dive into the water, not from the suction limit, slag absorption rate, dredging more thoroughly. 5. The overall equipment is simplified, the total unit investment is reduced. Conditions of Use: 1. The power supply is 50Hz / 380V three-phase AC power supply. 2. The maximum temperature of the medium shall not exceed 60 ℃. The medium contains no flammable and explosive gases. 3. The maximum weight concentration of solid particles in the medium: ash 45%, slag 60%. 4 crew diving depth: not more than 20 meters, not less than 1 meter. 5. The working position of the unit in the medium is vertical, the working status is continuous.
Chunlei Quntification Co.,Ltd , https://www.hychunleitools.com