Throughout the furniture industry, the furniture industry has fully entered the stage of branding. Branding means quality and more responsibility. For the furniture industry to develop higher and better, a low-carbon road is imperative. Faced with the development and changes of the furniture industry, furniture companies must carefully discover consumer needs, serve consumers on a down-to-earth basis, and vigorously advocate low-carbon furniture from the essence of furniture products. Facing low-carbon life, furniture companies should pay attention to the following points.
1. Environmental protection is a prerequisite
The topic of environmental protection is familiar in the furniture industry, but it is really rare. The formaldehyde incident is happening one after another in people's lives. In the report of carcinogens issued by the US Department of Health and Public Utilities QA and the Public Health Bureau, formaldehyde is included as a class of carcinogens. Similarly, the International Agency for Research on Cancer (IARC) has raised formaldehyde to the first category of carcinogens in 2004. This conclusion was drawn after 26 scientists from 10 countries evaluated the existing carcinogenic evidence of formaldehyde. The expert group believes that there is sufficient evidence to prove that formaldehyde can cause nasopharyngeal cancer, nasal cavity cancer and sinus cancer in humans, and there is evidence that formaldehyde can cause leukemia. Consumers need healthy and environmentally friendly furniture to guarantee life, but what is healthy and environmentally friendly furniture? Melaleuca Furniture believes that the material of healthy furniture should be an environmentally friendly material, with natural degradation, without polluting the environment and recycling The characteristic of utilization is a new type of material that is green, energy-saving, environmentally friendly and high-tech. From the selection of furniture raw materials to the improvement of processing technology to the management of the production system, we must implement it in place. Furniture environmental protection must be done well in order to say that we have entered the threshold of low-carbon life.
Second, innovation is the bright spot
From the beginning, the furniture industry has been calling for innovation. Throughout the development of the furniture industry, we have indeed seen a lot of innovations, but these innovations are basically innovations in style design and style. With the advent of low-carbon economy, the furniture industry must innovate through more channels to adapt to the future industrial development trend. Raw materials can try to innovate and allow a variety of materials to be integrated, such as solid wood and metal, plastic, glass, fiber, etc., to reduce the harvesting cycle of solid wood materials and expand the green area. The process can try to innovate, and improve the processing efficiency and per capita output value by increasing the technological content of the processing equipment, which can reduce the production cycle and save energy consumption, so as to achieve the goal of recycling low-carbon life.
3. Energy saving is the goal
Another aspect of low-carbon is energy conservation. At present, industrial processing is not in-depth, management is relatively extensive, and capacity efficiency needs to be improved. The first material in the furniture industry is wood. In view of the current situation, we have to carry out deep processing of furniture, speed up the improvement of technology, and transform the extensive management method into an intensive management method. Only in this way can we contribute to the goal of a low-carbon life. Here, we take the elephant furniture sold by Melaleuca Furniture as an example. Fang Deming, the general manager of Elephant Furniture, said that Elephant Furniture uses a ton of recycled honeycomb paper material, which can replace 30-50 cubic meters of wood, greatly reducing the use of wood and protecting the ever-decreasing forest resources. Reduce the high cost of importing large quantities of wood from China. In addition, the employees of Elephant Furniture will also use water and electricity to save their lives. As a basic criterion for their work, Elephant Furniture has begun to enter a low-carbon life.
With the Copenhagen Conference, "low carbon" has become a topic of common concern for all walks of life. Low carbon, environmental protection, and energy saving have become common keywords for furniture companies. Low carbon is an attitude to life and a responsibility to life. We must make every effort to make every bit of our lives so that we can become a low-carbon benefit member. Low-carbon life, let us work together.
For more furniture information , go to http://news.gojiaju.com/
                                           Welcome to provide news interview clues Advertising / News Hotline Turn 8004
Phlizon`s COB series Grow Light emits all the wavelengths of light which can be fully absorbed by the plants to create.
Best full Specturm designed to perfectly match large areas of indooor plants, especially for Medical Plant.
COB + Dual-chip,most efficient spectrum,high PPFD.Two cooling fans with double ball(import from Japan) and big aluminum heat sink to protect the grow lights from high temperature,good cooling,long lifespan.Photosynthesis and promote healthy growth budding and flowering.
1000w/2000w /3000w COB LED Grow Light, it will give you more options when your plants need different strength of illumination.
Grow Lights are a great choice for growers who are dealing with hot HPS lights and want to change to something that's going to run cooler. Although LED Grow Lights do produce heat,the smaller models might not bring up the temperature of your grow space.Even the more powerful models of LED grow lights that produce a lot of heat still have built-in cooling systems to help prevent the heat from beaming directly down onto your plants.
3000w led grow light Features
Indoor grow light
COB series, high power branded CREE COB with high Par value and deeper penetration
VEG/BLOOM and STRONGER switches for each grow stage.
Special spectrum for plant growing to increase the yield.
Building to Harvest: Beneficial for seeding to fruiting stage.
Good quality fans with low noise.
Easy to install by minute
Energy Saving, environmental friendly
3 Years Warranty
Compare led grow light to traditional HPS/MH grow light
WHAT MAKE UP AN EXCELLENT LED GROW LIGHT ?
1.PPFD Value : PPFD is Photosynthetic Photon Flux Density. When you choose a plant light, you should compare the PPFD values of different plant lights. The larger the value, the better the growth of the plant.
2.Actual Power: Because the actual power of the plant light always varies with different conditions, all Amazon sellers use the rated power to describe the power of the product because the rated power is constant. When you pick a LED grow light, the rated power of the plant light is a reference, and more importantly is the actual power.
3.Core Coverage: In addition to the above two, when you choose a plant light, you also need to compare the cover area of different plant lights, of course, the size of the core coverage area. In general, in germination stage, you can hang the plant light higher and the cover area is larger. In flowering stage you can hang the plant light lower and the cover area is smaller because the plant needs more light at this stage. You have to compare different coverage areas to choose the plant light that suits you.
Detailed images of 1000w 2000w 3000w 400w cob led grow light
Applications
Hydroponics, Horticulture, Agriculture and Greenhouse
Locations: Farm, Exhibition, Garden, Home, Urban, Bonsai, and University Lab
Growth of Fruits, Vegetables, Flowers and so on
Seeding, Rooting, Breeding, Flowering and Fruiting period
Packaging and Shipping
2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!
4. Delivery Time: stock avaiable sample will be delivered immediately ; 3-7 days for trial order; 7- 25 days for batch goods
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3. Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4. While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp
Trade Terms
Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)
Sample will be delivered within 7 working days.
Discounts are offered based on order quanlityes.
MOQ:sample order are acceptable
Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.
PHLIZON LOOKING FOR DISTRIBUTOR ALL OVER THE WORLD
If you are interested in, and
1.own several store for agriculture in your local market
2.or in the business of grow light equipment
3.or good relationship with grower or greenhouse owner
To be a distributor, max support will be offered:
1.price support
2.technical support
3.new product support
4.24 hours after-sales service online
PH-B-L6,Optic Cree Cob Grow Light,600W Led Indoor Grow Lights,630W Led Grow Light,Cob 3000W Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com