Recently, a TV reported that an electric car owner found that his car key could open the news of someone else's car lock. In fact, this news says that the new is not "new", that a key can open two or even more locks.
According to the author's investigation, the car lock bought by the electric car owner is produced by a small factory. The small factory has insufficient funds and the number of molds for producing locks is small. Therefore, there is room for matching parts in the manufacturing process of the locks. Smaller, the probability of finished products with the same lock cylinder increases, which leads to the problem of “one key to open multiple locksâ€.
The news reveals the reason for the problem, but the author believes that the incident brought us more than this. The existence of the problem of "a key to open more locks" actually exposes the locks of our country to a certain extent. Enterprises, especially small and medium-sized lock companies, are currently facing problems.
First of all, there are a large number of small and medium-sized lock companies in China, but their funds are limited. The financial constraints make it difficult for most companies to buy more lock molds, and there are no more lock molds available to produce more locks with different lock cylinders. When a large number of locks with the same lock cylinder are put on the market, because the quality of their products is not guaranteed, the desire for consumers to purchase is reduced, resulting in a backlog of products, and ultimately the profits of other companies are declining. Once the profits of enterprises are reduced, the recovery of funds will become difficult, and enterprises will not spend more effort to expand the types of lock molds. After repeated, enterprises will fall into a vicious circle.
Second, some lock companies do not act according to industry regulations and standards. Locks in the lock industry that use the same lock core mold for the same lock factory cannot be sold to the same area. But in the specific operation process, not every company can do it. In the case of large-volume lock purchases or due to factors such as the narrow distribution of products, the locks produced by the same lock cylinders in the same lock factory will be sold to the same area. There are both profit factors and corporate conscience. The problem, but no matter what the reason, some of the lock companies do not act according to industry regulations and standards, have brought negative impact on China's lock market.
Third, the level of research and development of lock companies is insufficient. The manufacturing process of the lock is very complicated. Sometimes a seemingly light and small part is often produced in dozens of processes. In the previous article, the author once explained the importance of the lock mold for the production of locks, but now the importance of the research and development of lock molds in enterprises, especially small and medium-sized locks, still needs to be improved. Although it is possible to purchase different types of lock molds to solve the problem of matching and repeating lock parts, this is not the cure for "this". Imitating others, without their own unique production technology, the product may still "crash", and the hidden danger of "a key to open more locks" will not be fundamentally lifted.
We can't help but ask, who is the lock locked in the end? The problem of lock enterprises in China has become increasingly prominent, and the future development of the industry is worrying. In view of this, the author suggests that it may be possible to solve the following aspects.
(1) Calling on the state to issue relevant policies and provide policy support to lock enterprises, especially small and medium-sized lock enterprises.
(2) Tightening the industrial upgrading of the lock industry, integrating by region, making full use of the existing resources of each enterprise, complementing each other's advantages and coordinating development.
(3) Increasing the inspection of industrial regulations and standards for lock-and-lock enterprises, and penalizing enterprises that violate industry regulations and standards.
(4) Encourage lock enterprises to carry out technology research and development and talent cultivation, and establish a lock brand and patent awareness.
People now often discuss crisis awareness and crisis management. The author believes that lock companies are now at the crossroads of “crisis†and “transitâ€, how to turn “crisis†into “transfer†and let locks “lock†to the market. Instead of “locking†the business, this requires the joint efforts of our entire industry and the entire society.
Concerned about surprises
Tag: Locks, transfer, lock, lock cylinder, crash
Previous: Need to know the following precautions when purchasing power tools Next: Accelerate the development of hardware tools industry feasibility measures
Peristaltic Pump Filling System
Peristaltic Pump Filling system can fill liquid with a stable and precise amount of volume. Peristaltic Pump Filling System is consist of several filling units with integrated peristaltic pump part.
This Peristaltic Pump Filling system supports PLC control which can work with your packing machine.
Support Nozzles number customized to meet your production requirement. With the Touch screen controller, you can control 2-32 filling units, basing on the type of production line.
Peristaltic Pump Filling system can be used for a wide range of applications, such as the food industry/pharmaceutical industry/cosmetics industry, etc.
Peristaltic Pump Filling System,Automatic Fill Peristaltic Pump,Smart Peristaltic Pump,Fill Peristaltic Pump
Baoding Chuangrui Precision Pump Co., Ltd. , https://www.crprecisionpumps.com