Cable take-up rack is a kind of line tool. It is very long in construction. Now Bazhou Xintong tells you the production of simple cable take-up rack:
The simple cable pay-off frame consists of a base bracket, a height-adjustable support, a U-shaped card for the rotation of the steel pipe, and a steel tube for the wire reel. Each of the two bases is made of 60cm long 10# channel steel, and the notch is placed upward in the middle of the channel to weld a DN65 galvanized steel pipe with a length of about 100cm, which serves as the main support. A DN50 galvanized steel pipe with a length of about 80 cm is placed inside the steel pipe to adjust the height.
At the same position of the two tubes, when the height is adjusted by opening a row of six Φ14 holes, the inner tube is stretched upward to align the holes of the two steel pipes, and then the Φ10 steel bars are passed through the aligned holes of the two pipes to fix the steel pipe. live. This can not only play a supporting role, but also adjust the height according to the specific construction site.
Remember that the inner tube height is slightly higher than the outer tube when it is not adjusted, which is convenient for inner tube welding and telescopic. Two 50*5 angle steels can be symmetrically placed between the galvanized steel pipe and the base to form a triangular bracket shape. This makes the base more stable.
A DN100 U-card can be welded to the top of the DN50 galvanized steel pipe to support the bearings as a rotating horizontal steel tube and reel. Place a DN65 horizontal galvanized steel pipe with a length of about 80cm on the U-shaped cards at both ends. When laying the wire, put the wire reel on the horizontal galvanized steel pipe and drag the cable around the horizontal steel pipe to turn the reel.
In order to prevent the friction column from rotating when the coil is rotated, a 30*3 angle steel can be welded to the horizontal steel pipe near the ends of the U-shaped card as a line card. When there are multiple reels at the same time, spacers can be provided in the middle to prevent the phenomenon of intertwining and improve the construction speed.
More cable pay-off rack knowledge, pay attention to Bazhou Xintong line tool factory, our factory specializes in producing cable pay-off rack, cable pulley, aluminum alloy pole machine, small rhinestone pipe jacking machine, fiberglass puncher, motorized winch and other lines tool! Cable take-up frame dust filter
曼 filter
Hedeck filter
Fiberglass perforator
Chef costume
Steel wood staircase
Steel wood staircase
Transportation Facilities
Cold bending machine
Cashmere pants oil and water separation net truss http://xldhjc.com
Aluminum Coated Coil with RAL Colors
Aluminum Coated Coil could be used for Aluminum Composite Panel, aluminum roofing, gutter, shutter, ceiling, truck, etc many industries. Coating could be PVDF and polyester. Series 1, 3, 5, 8. Thickness: 0.03mm-4.0mm
aluminum coated coil,aluminum embossed coil,aluminum roofing, aluminum gutter, metal roofing,aluminum shutter,aluminum ceiling
SHAOXING YOTO IMPORT&EXPORT CO., LTD , https://www.sxyotoes.com