What does the bathroom sewer anti-taste have to do with these 7 strokes?

Under normal circumstances, if the ventilation of the bathroom is not very good, coupled with floor drain anti-taste, there will be a more unpleasant smell, I believe we have encountered the same problem. So, today, we will analyze how bathroom sewer anti-taste is done.

How to do a bathroom sewer anti-taste

First, check whether the sewers are open and whether foreign matter affects drainage. If there is a blockage, first clear the sewer. If the sewer is not blocked, but it returns odor, you can use the principle of water sealing, use a thin plastic bag to put clean water, seal the bag mouth, on the mouth of the sewer cover strict, play the role of closed odor. In addition, it is advisable to keep fresh water in the bowl-shaped water retaining structure at the same time as the mouth of the sewer, so that it is more effective in preventing the occurrence of offensive odors.

How to do the bathroom sewer anti-taste

Floor drain and anti-taste: The reasons for the return of the sewer are mostly bathroom anti-flavors, which may be caused by floor drains. Some floor drains may also cause problems such as overflow of sewage and breeding of bugs. It may be that the deodorant effect is not very good. You can go to the store to buy a deodorant effect, so that the smell inside the sewer is difficult to come up.

How to do three things bathroom sewer anti-odor

Ordinary sewer anti-taste: If it is just an ordinary sewer anti-taste, a filtered metal mesh cover can be added to the waterway to filter out large solids such as hair and vegetable residue. Then, the position of the sewer can use a net-shaped bag to cover the position of the sewer mouth. It should be noted that the bag must be fixed and not to be washed down the water by a large stream of water.

How to do bathroom sewer anti-taste

The floor drain of the toilet is a key point: In order to increase the storey height and reduce the cost, many newly-built communities have already cancelled the anti-water bend below the floor drain. Instead, they have adopted a new type of deodorant floor drain to ensure that the odor of the sewer is not dispersed. These deodorant floor drains are often made of pvc material and are far inferior to the stainless steel and copper floor drains sold on the market. Many owners have replaced the floor drains that look beautiful and unsatisfactory when they are renovated. The water leakage from floor drains is very shallow and cannot be isolated. The odor of the water pipe causes odor in the bathroom. Therefore, it is recommended not to change it easily. If it has been replaced, it can be replaced with a deodorant drain so that it will not be deodorised.

How to do toilet sewer anti-odor five

The water pipe in the sink is also a place where anti-taste often occurs. The connection between the sink and the sewer is not good. There is no strict seal, and the odor will enter the room directly from the gap. The treatment method is: Workers are required to seal the gap at the interface with glass glue or other adhesive so that gas cannot be emitted. Some water pipes are used to make anti-water bends. After a long time, the hose is deformed into a straight pipe, and the water seal is lost. The sewer and the room form a straight through, and the odor directly enters the room. The treatment method is: change the hose. Dedicated re-pipe.

Toilet sewer anti-odor how to do six

Anti-odor floor drain is water shortage. At present, the deodorant floor drain on the market is mainly composed of three parts: the upper cover, the floor drain body and the floating cover. When the floating cover has water, it can float up and down with the water in the floor drain body. When there is no water or water, it will cover the sewage pipe. Prevents odors from going down the pipe to the interior. Although the floating cover can cover the sewage pipe, sometimes there will be a little odor. Therefore, it is necessary to maintain the depth of the water seal layer in the floor drain. Therefore, it should be filled with water to maintain the depth of the liquid surface.

How to do toilet sewer anti-odor seven

Toilet return: The structure of the toilet is irrational, the water seal is not strict, resulting in the back of the sewage pipe, or the sewage pipe is misaligned when the toilet is installed, the base sealing ring is aging, or the base seal is not good, which can also lead to backwashing or even leakage of sewage. So it's best to open the reinstall.

Editor's summary: What to do about toilet sewer anti-taste is introduced here, and I hope to be helpful to everyone. Want to learn more related knowledge can focus on this site information.

Floor drain bathroom toilet decoration bathroom sewer anti-taste how to do

SINK ACCESSORIES

Kitchen Accessories,Kitchen Cabinet Accessories,Kitchen Board,Kitchen Supplies

JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiaogroup.com

This entry was posted in on