Any electromechanical system requires appropriate support and support equipment to support its normal operation. Support and support equipment can be configured for different levels of assurance. For the UAV system, many of the devices in the support and support equipment are used in the first line, and must be carried with them, so that they can be immediately supported. Other support and support devices do not need to be used immediately and can be stored at the company.
The first category of support and support equipment is discussed here, including the following equipment: The Operation and Maintenance Manual usually includes a system manual and a system usage history. The resume can be used separately and can be used as part of the operation guide and maintenance manual. The system manual describes the main structure and components of the system, precautions and reasons. The operating instructions include system erection, inspection adjustments. Task preparation and execution, and recovery and system withdrawal after the mission is completed. The system usage history is used to record historical information used by the system. The information it records includes the operator, time and duration of each task, test results and status, and any important technical observations and judgments. The maintenance manual is used to guide the inspection and component replacement of each module of the entire system.
The Service Manual will provide methods for checking, cleaning, lubricating, and calibrating specific parts to replace parts that have expired based on their life cycle. The system requires all scheduled maintenance to be completed and any remedial maintenance is recorded. Consumables are required to carry consumables such as lubricating oil, cleaning materials, batteries, optical discs, fuel oil, etc. at the control station according to the size and quantity requirements of the system, especially when the control station uses the same fuel as the aircraft. For large systems or for safety reasons, fuel can be carried by a separate vehicle. The life part of the system is listed in the replaceable parts maintenance manual, and the life part is supplemented by the logistics department at the company base of the drone.
If the drone system is mobile, the operator must ensure the type and quantity of parts carried according to the scheduled working hours, away from the base or other newspaper support. Vulnerable and Replaceable Parts Vulnerable parts include those that are susceptible to damage, such as parts that may be damaged by falling under adverse weather conditions. The consumable parts of these Qilin Aviation Technology Co., Ltd. include aircraft detachable wing tips, aircraft propellers and components on the aircraft landing gear. Parts that are replaced as appropriate include spark plugs in the engine. The control station also includes components of this type, which have been confirmed during the system development phase and have been validated and finally included in the service manual.
Tools include tools for daily operation and maintenance, covering a wide range of electronic, electrical, and mechanical types of objects, such as electronic measuring instruments, battery chargers, and torque wrenches. And fixtures, locks, etc. required for testing subsystem functions. Tools required for daily operations should include starting and inspecting equipment. Fixtures typically include the tools required for inspection, such as control setup and range inspection tools, and locks may include the tools required for mission load function inspection.
As with other support and support equipment, the types and quantities of tools mentioned above also depend primarily on the type of drone system. Tool requirements are considered during the system design phase and are fixed and determined during the system development phase. One principle of tooling is to reduce the number of tools required, especially the number of specialized tools, mainly equipped with standard international tools. Auxiliary equipment Auxiliary equipment is generally considered to be part of a drone system, especially where the control station vehicle is integrated, such as power generation equipment, not on the trailer, but as an auxiliary equipment, as well as its proprietary fuel supply. And repair equipment. UAV systems with fixed base operations are generally able to obtain support from local service websites, but it is also important to select local generators as backup machines.
Editor in charge: Malan
The Ceiling Fan Light is beautiful in appearance, equipped with durable fan blades and lighting of different colors and styles, and has functions such as lighting, cooling, and decoration.There are much more Led Ceiling Fan styles in our website,such as DC Ceiling Fan ,Iron ceiling fan,Wooden Blades Ceiling Fan With Bulbs,Retractable Ceiling Fan Light,Simple Ceiling Fan Lamp,and best decoration Plywood Led Ceiling Fan.And there are more items are not showing on the website,please feel free to contact us directly for more information.
Big Ceiling Fan,Large Ceiling Fan,Ceiling Fans With Remote Control,Large Industrial LED Ceiling Fan,Industrial Ceiling Fan Light
JIANGMEN ESCLIGHTING TECHNOLOGY LIMITED , https://www.esclightingfan.com