The rise of modern house-wide custom furniture, its customizable wardrobe features a uniform style of change and more and more consumers are favored. Generally, the basic points of the board are: first, environmental protection, health and pollution, secondly, design and installation are beautiful and generous, and third, the merchant service is fast and convenient. Nowadays, there are a wide variety of market plates, including solid wood panels, solid wood finger joint panels, solid wood laminate panels, fragrant panels, particle boards, MDF, etc., and now summarize your personal opinions and suggestions, and share them for your reference:
First, the solid wood finger jointed board, the finger joint board is made up of multiple pieces of wood, the upper and lower no longer sticks the splint, because the vertical board uses a jagged interface, similar to the two hands and fingers cross butt joint, it is called the finger joint board. It greatly improves certain properties of wood, such as anisotropy, heterogeneity, swelling and shrinkage, while retaining the excellent characteristics of the logs. In the processing of the plate, the urea-formaldehyde glue is not used, but the white latex is used, so the environmental protection can be assured.
Second, solid wood particle board, also known as particle board, is to be taken from the forest interval, small diameter material (usually less than 8 cm in diameter), harvesting residues and wood processing residues, etc., after drying, mixed with adhesive, hardener, Waterproofing agent, an artificial board pressed at a certain temperature. Because the plate needs to add a large amount of urea-formaldehyde resin glue and the residual release of a large amount of free formaldehyde, the environmental protection of the plate is far lower than that of the log material; but with the continuous improvement of the plate-making process, the environmental performance of the solid particle board is also continuously improved. At present, the most environmentally friendly particle board on the market can reach the E0 level, and the formaldehyde emission is less than ≤0.5mg/L, which has become the most popular cabinet board material on the market. At present, the environmental performance of E1 grade boards is generally on the market, and E0 grade boards are better.
3. MDF, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber, using urea-formaldehyde resin or other suitable adhesive. According to their density, they are divided into high density board, medium density board and low density board. The standard for domestic high-density boards is lower than the international standards, because more attention needs to be paid when choosing. Its environmental quality is the same as particle board.
4. Solid wood multi-layer board, also known as plywood, is made of birch, poplar, elm, paulownia and other wood sections, which are cut into veneers, or cut into thin wood by wood. The world's leading Bayer soybean protein glue is used as glue. Adhesive, glued three- or three-layer thin sheet, usually with odd-numbered veneers, and the adjacent layers of the veneers are arranged in a vertical direction. Its environmental performance is better than particle board and MDF, and it is also outstanding in waterproof performance.
5. Hexiang board is made of crop straw and slag as the main raw material. It is made of MDI glue and functional additive. It is made of high temperature and high pressure. It is not only smooth and smooth, the structure is even and symmetrical, the board surface is solid, and it has good dimensional stability. It has the characteristics of high strength, environmental protection, flame retardancy and good weather resistance. It also has excellent processing properties and surface decoration properties. It is suitable for various surface decoration treatments and mechanical processing. Especially, the special-shaped edge processing has obvious advantages compared with particleboard. Can be widely used to replace wood-based panels and natural wood. In terms of environmental performance, it is very prominent, zero formaldehyde release, as natural and natural as logs. The waterproof performance is equivalent to that of solid wood multi-layer board, and it can be applied to the main material of decoration in any room.
Sixth, solid wood panels use complete wood, the material is taken from the natural trees of the forest, there is no concern about environmental pollution, but the cost is relatively high, and the production and construction process is complicated and cumbersome. Now more and more consumers choose logs for solid wood doors, and cabinet panels use other environmentally friendly plates. For example, choose a solid wood wardrobe in Jinan. If you don't require a brand, you can consider looking for a local Jinan Jieya Furniture Company to customize the solid wood wardrobe.
At present, the thickness of the board of the wardrobe is mainly 5mm, 9mm, 18mm and 25mm, respectively, which have different uses: 5mm and 9mm thickness of the board, mainly used for the back board or the door core board; 18mm thickness, is the main board of the cabinet; 25mm The thickness is mainly used for local processing with high load-bearing requirements such as bookshelves and table tops.
The quality of the wardrobe is identified, mainly whether the panel has chipping and the edge is intact. The manufacturer uses a precision panel saw to cut the sheet, and there is no chipping around the sheet. After the edge sealing around the fully automatic high-temperature edge trimming machine, it can effectively prevent the moisture in the air from intruding into the interior of the plate. Smell, high-quality materials, no matter how new or no pungent taste; look at the anti-counterfeiting code, identify whether it is genuine; touch the edge, check whether it is smooth, delicate, strong adhesion.
As for the price, the MDF and the particle board have the lowest cost and the most widely used, and are the mainstream plates in the market. The solid wood multi-layer board and the fragrant board have excellent moderate price performance, and are high-quality wardrobe sheets that need to be vigorously promoted at present. Solid wood panels and finger joint panels, directly belonging to pure solid wood, high cost and natural price are also expensive, but solid wood furniture in particular need to pay attention to the identification of solid wood furniture made of patch panels. However, for a penny of goods, it is necessary to flexibly select suitable plates according to the needs and requirements of their own decoration to create a solid wood wardrobe that is environmentally friendly, beautiful, healthy, waterproof and durable. Source: Public Network
LED tea lights have become increasingly popular in recent years as a beautiful and safe way to add ambiance to any event or setting. Unlike traditional candles, LED tea lights are battery operated, eliminating the risk of fire and the need for constant monitoring. These battery-operated tea lights come in various shapes and sizes, resembling real tea light candles, and are powered by energy-efficient LEDs that often last for over 100 hours. LED tealight candles are perfect for decorating indoor and outdoor spaces, adding a warm and cozy glow to any occasion such as weddings, dinner parties, or just a relaxing night in. Their convenience, safety, and long-lasting performance make them an ideal way to create a beautiful atmosphere without any hassles.
Battery Tea Lights ,Battery Operated Tea Lights ,Battery Tea Light Candles ,Led Tealight Candles
Ningbo Le Monde Import & Export Co., Ltd. , https://www.zjlemonde-lighting.com