Everyone knows that the quality of the house is becoming more and more worrying. Most people in the house will accept it. When the house inspection work is not done well, there will be great trouble after late check-in. The following Xiao Bian will introduce to you the recommendation of the seven-point experience on how to inspect the house and check the new house when the new house is delivered.
1, check the situation outside
First of all, we must check the exterior of the house to see if the external wall tiles are firmly installed. We also need to check whether the unit door is in good condition. In addition, some public areas are also required to check it. If there is no problem, you can open the house. Doors undergo internal acceptance.
2, check the height of the floor
At this time, it was checked whether the height of the floor was the same as the height of the contract. For example, some numbers such as water meter numbers and meter numbers were to be clearly noted. At the same time, the height of the floor, the distance between the toilet pits, and the length of the bathtub were measured. The width and the size of the shower room should also be recorded. After these are all finished, we must check the roof and see if it has any tilt problem. Then when measuring, we can take four or five points randomly from the roof, and then Then measure it.
3, check indoor doors and windows and balconies
Doors and windows must also be checked clearly, for example, to see if there is cracking on the balcony, but also remember to check whether the paint is full. Also remember that when checking the sealing of the door is good, you can consider putting a piece of paper on the sealing point, test it, and remember to check whether the screen window and the sash on the sliding window are flexible. This kind of collision situation and so on.
4, check the security door
Security door inspection can be said to be an indispensable step in the delivery of a room. It must be checked carefully. The first thing to check is whether there are cracks, deformations, etc. The next step is to see how tight it is, depending on the lock of the door. Is the switch flexible?
5, check the wall ground
Also check whether there is any leveling on the wall surface or the ground surface, and look at whether there is any seepage, cracking or emptying. If any problems are found, then the property owner must handle it at this time. It must be signed after no problem.
6, check the water up and down
When checking whether the water is up or down, you can try to open the tap to a larger one. At this time, if you listen to whether there is any squeaky sound, it will indicate smoothness. At the same time, check whether there is any water accumulation. After confirming that there are no problems, then remember to cover it with a plastic bag to prevent things from falling.
7, check the kitchen and ceiling
If you buy a hardcover room, you must remember to check the kitchen ceiling to see if it is installed securely. Also, pay attention to whether there are empty drums in the areas under the wall tiles and floor tiles. The hammer taps the surface to know it.
Summary: How to inspect the house and the new house when the new house is handed in. Seven-point experience recommended relevant content Introduced to this, the above recommended these methods can not be sloppy in the inspection of the house, if not received at that time, after the late check-in will have to deal with Very troublesome.
TFM Telescopic Mast Series (Carbon Fiber)
Tfm Telescopic Mast Series,Push Up Mast,Crank Up Telescoping Mast,Antenna Mounting Pole 25 Ft
TIANHEMAST , https://www.robomasts.com