Wall sockets are available in every home, and wall socket switches have brought a lot of convenience to our lives. But sometimes it may also bring us danger. The existence of a switch socket is an “invisible bombâ€, especially if it is not properly installed, the danger is even greater. So how to install a wall outlet ? The following Xiao Bian will take everyone to see it!
1. The wall outlet switch cannot be installed on the top of flammable combustibles, because if the inadvertent flammable combustible material is burned, it will cause the wall outlet switch cover to burn out. As a result, the core will be exposed and water vapor will enter. Causes a short circuit or even causes a fire.
2. The wall outlet switch must be installed with an arc-extinguishing device so as to avoid the risk of fire or explosion that may be caused by leakage of combustible gas.
3. The wall switch sockets are divided into two types: surface mounted and concealed mounted. The surface mounted can not be less than 1.8m, the concealed mounted can not be less than 0.3m, the socket between the kitchen and the bathroom should be higher than the ground 1.5m, the air conditioning socket should be higher than 2m.
4. The principle that must be followed for the wiring of the switch socket is "Fire line into switch, zero line into the lamp," and the outlet must be equipped with a leakage protection device.
5, the wall switch socket is best to install a protective box or baffle, in order to avoid water or oil infiltration, causing a short circuit or leakage. Especially families with children are in danger of getting an electric shock in order to prevent children from reaching for a hand when they are playing.
6, the plug in the socket is broken, it is timely to replace, it is best not to use a bare wire instead, so easy to fire.
7. The wall switch socket in the kitchen cannot be installed above the stove because the high temperature will cause the socket to be overheated and damaged.
8. The operating voltage and current of the bulb corresponding to the switch should be consistent with the power of the socket. If it is not the same, it will cause the temperature to increase and cause fire.
9, the switch socket must be firmly installed, the screws should be tightened to ensure that the wire contacts are good.
10, Although the wall switch socket is not as good as possible, but in order to make some electrical appliances more convenient to use, as far as possible or reasonable reserve a few will be better.
After reading the wall socket installation instructions mentioned in the small series above, is it more knowledgeable about this knowledge? Safety knowledge is something that everyone needs to understand in order to prevent possible danger. If you want to know other related information, please continue to pay attention to this site, more exciting so stay tuned!
Wall socket
Fiberglass fabric has gained significant popularity in various industries due to its exceptional strength, durability, and versatility. This fabric is made from woven strands of fiberglass, resulting in a lightweight yet robust material. With its high tensile strength and resistance to heat, chemicals, and abrasion, fiberglass fabric finds applications in a wide range of fields. It is commonly used in the construction industry for reinforcing concrete structures, as well as in the manufacturing of insulation materials, protective clothing, and composite materials. The flexibility and moldability of fiberglass fabric make it an ideal choice for creating custom shapes and structures, making it a valuable asset in numerous industrial and commercial applications.
Fiberglass Fabric,Glass fibers,Reinforcement
Jinwu Glass Fiber Co., Ltd , https://www.jinwuwindows.com