For hexagonal lathes such as C365L and CB3450, the hexagonal tool holder cannot be conical. With the aid of this tool holder, the outer conical surface of the car can be used. The tool holder (see picture) is used by our factory for the original iron cow? The rear wheel hub sleeve of the tractor has been used for many years. Use four M18 fastening screws to fasten the shank to the turret, with a center height of φ70 mm cylindrical shank. The pin 11 is a pivot of the tool holder (?), the tool holder 1 is loaded with a turning tool, and the bearing 7 is mounted at one end. The compression spring 6 forces the bearing 7 against the template and is clamped to the square tool holder by the template. When turning, the square knife holder does not move and is fixed by the template. When the turret turret moves toward the headstock, the turning tool is opposite to the slanting direction of the stencil, and the bevel angle is equivalent to 1/2 of the slant angle of the template (the lever ratio is 60:
Sauna Lighting
DSPOF produce differnt of Fiber Optic Light,alos include the Sauna lighting kits.
The Fiber Optic Sauna Ceiling light are safe for use in wet and humid areas as no heat or electricity is present in the fibre optics or fittings, but the illuminator which contains the electricity, must be located outside the main sauna or steam room.
Sauna lighting is something of a specialist field. This is because the heat of the sauna will cause most traditional light sources to fail. To illuminate a sauna safely and effectively, one must either use a fibre-optic lighting system, or use specialist sauna LED's. Furthermore, getting the light levels and in turn the ambiance in the sauna right, is crucial to the enjoyment of the sauna itself.
Sauna Ceiling Light,Sauna Lighting Kits,Sauna Room Kit,Sauna Light Kit
Jiangxi Daishing POF Co.,Ltd , https://www.opticfibrelight.com