Good machines need us to maintain, and only use properly, to extend its life, as well as the slurry pump. The maintenance of the slurry pump has a great influence on the running stability of the slurry pump. Whether the slurry pump works perfectly depends on how you maintain it. Now choosing a good slurry pump is no longer a problem that bothers us. What we need to know is how we should maintain it during use. Slurry pump is mainly for the purpose of conveying flow, so the best running flow control system installed flow meter (meter), to monitor the flow at any time to meet the requirements; equipped with cyclone pipeline system, slag system, pressure Filter dewatering system also requires a certain pressure at the exit of the pipeline. Therefore, in this system should also be fitted with pressure gauge to monitor whether the pressure meets the requirements. In addition to monitoring pump flow during operation, pressure, but also to monitor the motor do not exceed the rated current of the motor. Always monitor oil seals, bearings and other normal phenomenon occurs, the pump takes place or overflow pool, etc., and at any time. Slurry pump should be started before the pump inlet valve, close the pump outlet valve. Then start the pump, start the pump and then slowly start the pump outlet valve, pump outlet valve opening size and speed, the pump should not vibrate and the motor does not exceed the rated current to grasp. Series pump start, also follow the above method. Just open a pump, you can end of the pump outlet valve to find a little (open size to a pump motor current rated current of 1/4 is appropriate), and then you can start two three Until the last stage pump, tandem pump all started, you can gradually open the last stage of the pump outlet valve, the size of the valve to open the speed, the pump should not vibrate and any level of pump motor is not over-rated current to grasp.
Hss Drill Bits,Cobalt Drill Bits,Twister Drill Bits,Drill Bit Set
Danyang Yongshun Tools Co.,Ltd , https://www.ysdrillbitset.com