Plate
The board is the main component of the overall wardrobe, and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards (particle board), and fiberboard. Among them, fiberboard has high density, medium density and low density.
1, particle board (particle board): middle long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. Suitable for relatively humid environments such as kitchens. The disadvantage is that it cannot be surface-milled. The edge banding is easy to fall off (because there is a certain gap between the plates, the surface is not flat enough).
2, MDF (fibre board): the wood is broken, the original fiber is pressed by high temperature, the surface is flat, the milling is easy, the stability is good, and the nail holding power is strong (because the MDF is solid material, all The nail holding force is greater than the particle board), and so on. It is better than particleboard in strength and hardness. But there are also shortcomings that are not resistant to blisters. The amount of expansion after being blistered is approximately 2 mm on one side. Therefore, the MDF is more suitable for a drier environment such as a wardrobe.
The common point of the above two kinds of plates is artificial plates, and they are not immersed in water. Therefore, the cabinet installer will put a bright waterproof tin foil on the incision when assembling the cabinet.
Mehd Electric Telescopic Mast,Extendable Antenna Pole,Push Up Antenna Mast,Telescopic Aerial Pole
TIANHEMAST , http://www.robomasts.com