KCB stainless steel gear pump bearing features KCB stainless steel gear pump gear, shaft, pump body, safety valve, shaft seal composed of the end. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation. The pump has a well-designed drain and return tank, the gear torque in the work to bear the smallest, so the bearing load, wear a small, high pump efficiency. KCB stainless steel gear pump with safety valve as overload protection, safety valve full back pressure of the pump rated exclusion pressure of 1.5 times, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline. KCB stainless steel gear pump is mainly used for lubricating oil in a variety of machinery and equipment transportation lubricants for conveying viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), the temperature below 300 ℃ Lubricating oil. Stainless steel gear pump, can deliver non-lubricating oil, beverage, low corrosive liquids. Equipped with copper gear can deliver low-point liquid, such as gasoline, benzene and so on. In addition to this series of stainless steel pump configuration common motor, but also according to user needs with the specifications of the explosion-proof motor configuration. Material: 304.316.316L stainless steel. From the spindle extension to the pump to see, clockwise rotation. Flow: 1.1m3 / h-600m3 / h Pressure: 0.28MPa - 2.5MPa Mainly used in oil, oil depots, ports, terminals, ships and other large flow oil, unloading! Stainless steel gear pump structure features 1: sliding bearing stainless steel gear pump sliding bearing materials impregnated graphite, filled with PTFE, engineering ceramics. As the engineering ceramics have good heat resistance, corrosion resistance, abrasion resistance, so the stainless steel gear pump bearing more use of engineering ceramics. As the engineering ceramics are very brittle and the expansion coefficient is small, so the bearing clearance must not be too small, in order to avoid the occurrence of axial accidents. As the stainless steel gear pump to the transmission of the sliding bearing lubrication, it should be based on different media and the use of conditions, the use of different materials made of bearings.
Car Operating Panel,LCD car operation panel,Elevator Car Decoration, Stainless steel car operation panel
Suzhou FUJI Precision Elevator Co.,Ltd , https://www.profuji.com