Five mistakes in choosing and buying wooden doors

Because the wooden door can only see the surface can not determine the internal quality, so the consumer is at a loss to understand the quality, in the face of the salesman's introduction, only sigh "untouchable doorway." In this regard, the relevant consumer associations summed up the five major mistakes in the purchase of wooden doors, allowing consumers to quickly and better buy wooden doors suitable for their own.


Uniform solid wood furniture    Ketu Sofa

Solid wood composite door structure is more stable

Myth: Many consumers believe that the use of natural wood in all solid wood doors is certainly more environmentally friendly and the quality is relatively better.

Pointing doorway: Environmental protection is mainly due to the glue used in the wooden door. After processing, the finished solid wood composite door is environmentally friendly as long as it complies with national standards.

Compared with all solid wood doors, the internal structure of solid wood composite doors is more stable, solving the problems caused by the seasonal changes of wood core boards, the differences in the average moisture content in different regions, the inherent shrinkage and swelling of wood, and other various differences. It is characterized by small deformation, corrosion resistance, easy cracking, heat insulation, etc. It also has good acoustic performance and can effectively play the role of sound insulation.

Solid wood doors are not necessarily "all solid wood"

Myth: Many consumers believe that only “all solid wood” is good, so when they go to a wooden store to buy products, they will ask “is it all solid wood?” When they hear a negative answer, they think that it is not good.

Pointing doorway: All solid wood doors are solid wood from the inside to the outside, or the core material is made of multi-layer boards. Its structure is mainly the connection of the door frame, the door core panel, and it belongs to the middle and high grade products in the market.

Because all solid wood doors are not stable under the weather conditions in the north, they are more likely to cause door body deformation, fissures at the joints, and surface cracking than other types of doors. Therefore, the solid wood doors in the Beijing market are mainly made of solid wood. , put veneer "wood composite door."

Due to price reasons, solid wood doors are usually made of solid wood only in areas where less materials are used such as wood strips, edge seals, and the like.

The whole wooden door price includes three parts

Myth: Many consumers saw the label price, thinking that it was the price of the entire door. In fact, some wooden doors may be more than double the price.

Pointing doorway: Although the prices of common wooden doors in the market mostly use quotes for the number of units, but the price of some high-grade wooden doors includes three parts: door leaf price, door frame price and wood price. The door leaf is the main body of the door and is priced in square meters. The door frame contains two front and back sides and is calculated in terms of perimeter. The wood line is a part of the door frame that surrounds the wall and is priced in meters. In addition, the prices of solid wood doors and solid wood composite doors do not include hardware locks. Usually special composite solid wood door contains three parts of the price, consumers simply add the price of the lock on the original price.

Low-grade paint door has no special place

Myth: Due to the exaggeration of some sales personnel, the surface finish of the paint door was declared to be good, easy to scrub, and the moisture-proof and fire-proof performances were all better than ordinary wood doors. Therefore, the paint door was considered to represent high quality.

Pointing doorway: high-grade paint doors use piano paint and metal (car) paint, the process is complex, long processing cycle, the price is high.

Some of the paint doors mentioned by the sales staff on the market actually use only infrared light and other methods to bake the doors. At present, some wooden door products use this technology, and there is nothing special about it, especially self-proclaimed high-grade environmental protection. PU (polyester) paint.

The low-grade paint door with a very low price, under the pollution of oil fumes, may not be long enough to change color, and the luster will gradually disappear.

Door lock hole can not judge the quality of core material

Myth: Some consumers who have experienced renovations have observed that the wooden door locks are installed on site. Therefore, when purchasing wooden doors, it is considered that the core material of the purchased wooden door can be observed through the door lock hole.

Pointing doorway: In the current manufacturing process of wooden doors in the market, in order to make the lock more solid after installation, will strengthen the strength of the door lock hole area, most of them are used lining Glulam approach, so through the door lock hole to inspect the site Wooden door core material does not truly reflect the quality of the wooden door product core material.

The door to buy building materials knowledge wooden door brand wooden door price paint furniture flat meter decoration

Toilet Seat

A toilet seat is a component that is installed over the toilet bowl, also known as the seat for the person sitting on the toilet. Its main function is to provide a comfortable and hygienic environment for use. Here are some details about the common toilet seat cover:

  1. Comfort: toilet seats are usually designed with the user's comfort in mind, with materials and shapes carefully selected and designed to ensure comfort during use.
  2. Hygienic: Toilet lids help to keep the toilet hygienic by preventing the inside of the toilet from coming into direct contact with airborne contaminants such as dust and bacteria. Additionally, covering the toilet lid also reduces the spread of odours created when flushing.
  3. Durability: Toilet lids are usually made of durable and easy-to-clean materials that can withstand the friction of daily use and cleaning agents and are not easily damaged.
  4. Aesthetics: The design of the toilet seat also takes into account the overall aesthetics of the bathroom, and its colour, shape and style are usually in harmony with the toilet and the overall style of the bathroom.

In addition to the above basic functions, some toilet seat also has a special design, such as with a slow-down function of the toilet seat, you can avoid the noise generated by the sudden closure of the toilet seat; or with an antibacterial coating of the toilet seat, you can effectively inhibit the growth of bacteria.

In short, although ordinary toilet seat seems simple, it plays an important role in daily life, providing convenience and comfort for our life.


Toilet Seat,Toilet Seat Comfortable,Toilet Seat Cover,Duroplast Toilet Seat

Yangzhou Mifen Import and Export Co., Ltd , https://www.fanmitrkwc.com

This entry was posted in on