Â
1. Before operating the machine, please read the instructions carefully to prevent accidents and accidental injuries.
Second, check whether the three-phase four-wire power is normal, and whether the running direction of the grinding head and the grinding wheel is consistent with the direction indicated by the stroke button.
3. During the operation of the machine, the oil should be lubricated at any time on the track to prevent the track from being worn due to lack of oil.
4. In the process of calibrating, if there is any error in the left and right, it can be adjusted by the adjusting screw on the tool holder.
5. In the process of sharpening the knife, it should be noted that the amount of the feed can not be too large, generally controlled between 0.01 and 0.02 mm , in case the feed amount is too large, causing the paste knife and the heat to be too high to deform the blade, so that the blade is ground. The cutting edge is not in a straight line.
6. When there is a burr on the edge of the blade, it means that the blade has been ground. No need to feed the knife until the spark is small. Remove the blade and use the oil stone to deburr. (The method of using the oilstone must be strictly in accordance with the instructions for use)
7. When the machine is not in use, the water stain on the knife holder must be wiped clean with butter or oil to prevent rust.
8. The oil filling hole on the machine must be filled with oil before going to work every day.
Nine, the user must concentrate on the process of sharpening the knife and the process of taking the blade to prevent personal injury caused by danger.
10. Each of the sharpening machines of Tianming Company has a designated engineer to install free training, and follow-up technical support guidance. Please communicate with the after-sales engineers and contact the factory after-sales service center.
Attachment 1 , Reference: Tianming Grinding Machine Technical Support Center   Http://
Attachment 2 , cited website: China Grinding Machine Network   Http://
Attachment 3 , English information: China grinding machine supplier   Http://
White corundum abrasive is suitable for all kinds of high-end products, beautification treatment of surface of handcraft.hardware and so on. After sandblasting, the surface of workpiece is white without any impurities, eliminating the cleaning trouble. It is suitable for ultra fine grinding and polishing of crystal and electronic industry and making high quality refractory materials. It is suitable for processing hardened steel, alloy steel, high speed steel, high carbon steel and other materials with higher hardness and higher tensile strength. It can also be used as touch media, insulator and precision casting sand, etc.. 
White Aluminum Oxide Abrasive Paper
White Aluminum Oxide Abrasive Paper,Aluminum Oxide Paper Roll,White Abrasive Paper,Waterproof Sand Paper
Jiangsu Fengmang Compound Material Science & Tech Group CO.,LTD , http://www.fmabrasive.com