Autoclaved brick machine maintenance and repair

As the Mianshaozhuanji mainly to suppress fly ash, sand, sea sand, sand, slag, slag, stone powder, cinder, gangue, tailings slag, chemical slag as the main raw material, so the steam pressure Mianshaozhuanji The routine maintenance and repair is very important. Autoclaved Mianshaozhuanji maintenance and repair Notes: 1, the main power supply equipment should be used 25 mm2 above the aluminum or 16 mm2 above copper. The normal operation of the equipment input voltage: high voltage 380V-410V, low voltage 330V-360V, the device must be installed and reliable grounding to ensure the safety of the operator. 2, the pump motor was hold or turn strenuous, leading to burn the motor, the reason is the total pressure regulator valve (distributor under the big nut) regulator is too large. (The total pressure regulator should be gradually reduced until the motor is not very difficult to work when the rotation is not good) 3, the vibrator vibrations insufficient, a long brick cycle or loose brick, because the pressure under the mold pressure Adjust too large; (lower mold pressure regulation is too large, the pressure suppress the vibrator vibrator should be under the care of the fuel tank corresponding to the pressure regulator on the oil pressure regulator gradually reduced until the machine vibration force can give full play Out) 4, resulting in mold, balance arm and the main parts of the various parts of the cause of open welding or damage is caused by the lower mold under pressure regulation is too small; (lower mold pressure under pressure regulation is too small, the pressure can not be locked under the mold , Resulting in the impact of the mold and the vibrating table is too large, the whole set of equipment parts damaged too large, should be under the support cylinder on the oil pressure regulator corresponding to the pressure regulator gradually increased until the vibration of the machine was stable Down to reduce damage to the machine)

Steel Fiber

Steel fiber is fantastic reinforcement for concrete or thin bed concrete. It increase crack resistance, ductility and shear strength for concrete. In some application cases, it can replace steel mesh or steel reinforcement cage, which reduce labor cost and improve time efficiency for concrete casting.

Steel Fiber,Glued Steel Fiber,Loose Steel Fiber,Hooked End Steel Fiber

Shanghai Na Long Tech Co., Ltd , https://www.na-long.com

This entry was posted in on