In the choice of materials, in the end is the choice of ceramic tiles, or carpet or wood flooring is good? What are their characteristics and advantages? This has become a common puzzle in many people's decoration.
Cano tile
Look at a small number of tile color difference, size regulation is the top grade
From the original stone and wood to the world, to the current replacement of ceramic tiles, and the involvement of various glass and plastic materials, the entire home improvement world has become extremely colorful.
Low water absorption, good moisture resistance and dirt resistance
Tile sizes are generally 400 x 400 mm, 500 x 500 mm, 600 x 600 mm, and 800 x 800 mm.
Glazed tiles: Tiles made by firing glazed clay or porcelain.
Whole body brick: This type of brick is not glazing. After firing, it is polished on the surface. There are patterns inside and outside.
Vitrified tiles: Porcelain tiles made of high-temperature firing, high hardness.
Polished tiles: Polished from the entire brick, thin and light.
tips:
Wear resistance: It is divided into five degrees, from low to high, five degrees is super wear resistance, generally not used for home decoration, home improvement brick can be selected from one degree to four degrees.
Water Absorption: Determines the use of ceramic tiles. Tiles with high water absorption have low density and brick holes are sparse. They should not be used in places where they are frequently used to avoid cleaning after water absorption. Tiles with low water absorption rate have high density and high density. Moisture and stain resistance.
Hardness: It directly affects the service life of the tiles. It is especially important. It can be distinguished by tapping and listening. The sound is crisp and it indicates that the inner quality is good and it is not easy to deform and break.
Color difference size: According to the intuitive judgment, it is possible to check whether the colors of a batch of tiles are generally the same and whether they can be combined together well. The color difference is small and the size of the tiles is top grade.
How to choose a good tile surface should be flat and intact without spots
(1) Remove any piece from the packing box to see whether the surface is smooth and in good condition. The glaze should be uniform, bright, free of spots, lack of glaze, bumps, and the surrounding edges should be regular. Glazed glaze, astringent or air bubbles are quality problems.
(2) Take out a piece of brick and align two pieces. The smaller the middle gap, the better. If it is a pattern tile, four pieces must be used to piece together a complete pattern. It should also be considered whether the pattern of the brick is connected and clear. Then take out a box of bricks and place them on a large flat surface. Look at the entire effect from a little distance away. Whether it is white or other colors or patterns, it should have the same color. If there are individual bricks, deep or shallow, it will be hard to see. Affects the entire decorative effect.
(3) Put these bricks together and erect them. Compare the sizes of the bricks. The deviation of the small bricks is allowed to be plus or minus 1 mm, and the large bricks are allowed to be plus or minus 2 mm.
(4) Take a piece of brick to knock another piece, or use other hard objects to knock on the brick. If the sound of the brick is crisp and loud, it means that the quality of the brick is good and cooked well; if the sound is abnormal, it means that the brick has heavy skin or Crack phenomenon: when the heavy skin is the brick forming, the air in the material is not discharged, resulting in poor combination of materials and materials, internal cracks, can not be seen from the surface, only the sound can be identified.
Flooring Tiles Buy Tiles Home Decorations Glass Home Decorations Floor Tiles Glass Tiles Tiles Floor Tiles Tiles Specifications
Spring Steel For Measuring Tape,Bending Spring Steel For Measuring Tape,Rolled Bending Spring Steel For Measuring Tape
Wintape Measuring Tape Company , https://www.wintapetape.com