After the renovation of the house, due to the pre-modern Wuhan decoration company did not do a good protection of the finished tile, more or less this film will leave some stains, the following describes the commonly used decontamination methods
1. Oily marker, surface anti-fouling wax layer and paint, oil: You can use alkaline cleaners or organic solvents (and 5-keto, triethylene), and paint to remove oil.
2. Ink, paint pigments, etc.: Dilutions of sodium hypochlorite (bleach) can also be used. When used, the sodium hypochlorite diluted solution can be wiped clean by soaking it in the stain for a few minutes.
3. Scale, rust, cement, and rust spots: Use hydrochloric acid or phosphoric acid solution and wipe it several times.
4. Stains from tea stains, coffee, sauce vinegar, leather shoes, etc.: Dilutions of sodium hypochlorite (bleaching agents) can be used. When used, contaminants should be soaked with sodium hypochlorite for 20-30 minutes and then wiped with a cloth; For longer stains, soak for a little longer.
5. Rubber hammer decontamination method: first use 25% -35% sodium hydroxide solution to soak a day after the cloth, and then use 30% -50% hydrochloric acid thinner soak for half an hour after wiping with a rag You can.
6. Lime scale, ice cream: Use acidic cleaners, alkaline cleaners to clean
Decontamination should be noted:1. When using the above decontamination agents, wear plastic gloves. Avoid direct contact with the acid or alkali solution by hands or skin as much as possible to avoid injury to the body.
2. After removing the stain, clean the brick surface with clean water.
3. The latest decontamination cleaners are available for sale in supermarkets, and reference can also be made to the scope and methods of decontamination.
Three trees paint entrance decoration paint cement house decoration house decoration find decoration company okay tile adhesive
Previous Latex paint material and environmental protection
Next How plywood distinguishes quality
Today, Xiao Bian brings us ten things that make it easy for everyone to make renovations. Interested friends should not miss it. 1. Substrate disposal counterfeit index: ★★★★★ Phenomenon: Before applying latex paint and paving wall tiles, we must do a good job of substrate treatment. Some workers cut corners and cut materials in this regard during construction, and the unevenness caused uneven wall surface. After the paint is applied, there is a color difference. When the paint is applied, the paint is discolored and peeled off, or the ceramic tile is not firmly bonded. When you paint latex paint, you ...
How to maintain the tiles? 1. Ink and antifouling waxes must form mildew and use sodium hypochlorite diluent (bleach). When used, simply wipe the bleach for several minutes and soak it. 2, tea stains, fruit stains, coffee, sauce vinegar, leather shoes and other stains using sodium hypochlorite dilution (bleaching agent), use soak for 20-30 minutes after the cloth with a clean; some seepage into the brick for a long time Stains, soaking time can take several hours. 3, cement, scale, rust, rust ...
In home decoration, if you want to save the tiles and reduce the cost, it is necessary to calculate the amount of paving before you purchase the tiles. Tiles can be sold in blocks, or sold in square meters. Therefore, there are two methods for calculating the usage of tiles: ◠Calculated according to the number of blocks: Decoration area ÷ Tile area per block × [1+3% (loss)] = The amount of tiles required for decoration ◠Calculate the number of squares of tiles required for decoration according to the area +5%....
1. daily cleaning available household detergent, soap and other cleaning 2 with soap and a little ammonia or equal amount of linseed oil and turpentine mixture, the tiles can be rubbed more shiny, more decontamination 3 such as the ink, etc. The strong solution spills on the brick surface and should be wiped clean immediately. 4 Regularly polish the polished tiles to ensure long-term protection. The time interval is 2 to 3 months. 5 If there is a slight scratch on the surface of the brick, apply toothpaste on the scratch, and use a soft dry cloth to...
1, tea stains, fruit stains, coffee, sauce vinegar, leather shoes and other stains use sodium hypochlorite dilution (bleaching agent), soak for 20-30 minutes after use with a cloth to wipe; some seepage into the brick for a longer time stains, soaking It takes a few hours. 2. Ink and anti-fouling wax moldy mold spots are formed using sodium hypochlorite diluent (bleach). When used, simply wipe the bleach for a few minutes and wipe it clean. 3, cement, scale, rust, rust use hydrochloric acid ...
submit
The angle of the outer ring and the diameter of the outer raceway have been standardized in the same way as the outer dimensions. Changes are not allowed at the time of design manufacturing. As a result, the outer ring and inner assembly of tapered roller bearings are universally interchangeable worldwide.
Tapered roller bearings are mainly used to bear combined radial and axial loads, mainly radial loads. Compared with Angular Contact Ball Bearings, the load carrying capacity is large and the ultimate speed is low. Tapered roller bearings are capable of bearing axial loads in one direction and are able to limit the axial displacement of the shaft or housing in one direction.
Cylindrical Roller Bearings,Bearing 30208,Cyl Roller Bearing,Cylindrical Taper Roller Bearing
Hebei Fangqiang bearing manufacturing Co., LTD , https://www.fangqiangbearing.com