Analysis of imitation copper door and its imitation copper door maintenance

Can many consumers don't know much about what is a copper door? Today's Jiuzheng Building Materials Network   Let me introduce to you what is the imitation of copper doors and related maintenance knowledge.

It can be understood literally that the so-called imitation copper door means that it is not a copper door, but it is a series of products belonging to the copper door. It is a counterfeit effect of the copper door. The imitation copper door is made of electrolytic plate, and the surface is painted with paint similar in color to the copper door, making it look like a copper door, so it is called a copper door.

We can understand that because of the material of the imitation copper door, its maintenance is very important. If the surface of the copper door is especially detached, the electrolytic plate inside will be exposed, and the electrolytic plate will be in contact with oxygen in the air. Oxidation reaction occurs, causing the electrolytic plate to rust and affecting the appearance of the door. An important point in maintaining the copper door is to maintain the exceptional integrity of the outside to prevent bumps and impacts.

So how do you use and maintain the imitation copper door? The following is a summary of the following:

As we all know, the copper door belongs to the high-end products in the category, and the price is not cheap, so it needs to be carefully protected when used.

First, the copper door should normally be opened and closed slowly to avoid collision with other things and the protective layer of the copper door is destroyed.

Second, in the usual maintenance, you can use a dry towel to clean it. Note: Do not use detergents that contain chemicals that damage the protective layer of paint.

In daily maintenance, it is generally necessary to prevent oxides and microorganisms from invading the copper door. Because the air contains a lot of dust and acid gases, it will corrode copper in a damp environment, so we usually clean and dry when it is dry. It can be waxed on the copper door, which can not only isolate the air, but also prevent the green rust from affecting the overall appearance.  

The  granular of Activated Carbon has a very good removal effect for less than the molecular weight below 480 extractable organic matters, and the removal efficiency is very low for macromolecular organic matters. This is mainly because the micro-porous structure of the activated carbon, too large organic molecules cannot into the pores of the internal activity carbon, only adsorption in activated carbon surface.


Comparing the adsorption effect of volatile carbon and organic compounds on activated carbon, we draw the conclusion:

Activated carbon has a big difference in adsorption for volatile organic compounds and extraction of organic compounds. Volatile organic compounds with the molecular weight increased, the adsorption effect is better; and the extraction of organic compounds reduce with molecular weight, the adsorption effect is better. This is mainly due to volatile organic compounds mainly polar is the small organic matter, and the extractable organic matter is the relatively large polarity of organic matter. Activated carbon itself can be seen as a non-polar adsorbent for water adsorption capacity of nonpolar substances, which is greater than the adsorption capacity of polar compounds.  Moreover, the adsorbate molecule size and activated carbon in a certain proportion,  which is the most conducive to the adsorption. For small polar molecules, the larger of the molecular weight, the more conducive to the adsorption.

Coal-based Granular Activated Carbon

Coal-Based Granular Activated Carbon,High Iodine Active Carbon,Impurities Remove Activated Carbon

Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , https://www.nxyfrdhxt.com

This entry was posted in on