Identify eyelid hazard categories in the workplace. To identify eyelid hazards in the workplace, you can do this by performing on-site inspections. During the inspection, you can refer to the following questions to help identify:
1. Is it possible to cause damage to solid particles or liquids?
2. Is particulate matter moving at high speed?
3. What is the particle size of the particles?
4. Is any substance that may cause harm to the eyes emitted by a certain device, or is there debris in the work environment?
5. Is the liquid substance hot?
6. Is liquid splatter a chemical?
7. Is there a source of harmful light radiation in the workplace?
There are many sources of operations that can cause eye hazards in first aid kits. First aid kits must detect these hazards. First aid kits need to be identified at the job site. During the on-site inspection, you should pay attention to the following 7 points to help identify hazards:
a. Mechanical movement. For example, some moving tools or equipment with moving parts, or the movement of the operator causes collisions with fixed facilities, such as grinding, cutting, excavation, and the like.
b. High-temperature equipment that can cause facial burns, eye injuries, or burning of protective equipment, such as pouring, splashes of molten metal, sparks, etc.
c. Various types of chemical exposure operations, such as the use of liquid or powder chemicals.
d. Dust operations, such as grinding, powder handling, and packaging.
e. Harmful sources of optical radiation, such as welding, brazing, cutting, furnaces, heat treatment, strong light sources, and ultraviolet lamps.
f. The planning of the workplace, and the location of other people's work, whether the hazard is isolated or not, will affect people outside this area.
g. Electricity safety, such as the possibility of electrical equipment producing arcs.
Copyright Statement: This article is reproduced from online media and represents only the author's opinion. It has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.
Telescopic
steel cover (Telescopic steel shield)has
advantages of good sealing, can prevent iron filings and the coolant fluid. Product
is durable, smooth operation, low noise. It has beautiful appearance. It can
bring perfect appearance to the machine tool factory. Shields and machine tool are indispensable partners.
Our Telescopic Steel Cover (telescopic steel shields)can meet the requirements of modern machine tools for high-tech, correct installation position, and high working speed, etc.
When the running speed is below 15m/min,the working method of the cover is in turn, sliding between the box body. When running at high speed, shield driven by different ways are needed to ensure that each box to synchronous operation and eliminate the jostling between each other.
Telescopic Steel Covers (telescopic steel shields)are not simple products to manufacture. They require high-quality materials and components, as well as sophisticated manufacture technologies. High movement speeds call for continuous innovation.
Special anti-friction brass guides or wipers with polyurethane rubber are inserted on the sides of Telescopic Steel Covers(telescopic steel shields), at the discretion of the engineer based on speed, seal and dimensions.
The steel used is extremely high quality in terms of flatness, corrosion resistance and wear resistance. Thickness Steel Covers may also be made of stainless steel.
For high speeds or weights, special bearings are inserted for smooth, silent movement. Telescopic Steel Covers (telescopic steel shields)with bearings require tempered or auxiliary guides.
Compact, low-speed Telescopic Steel Covers (telescopic steel shields)are equipped with special anti-friction brass or non-metallic guides.
Wipers keep the surface clean and prevent chips and shavings from getting onto expensive rails. They must be heat and coolant resistant, and thus are made of polyurethane, with or without a protective stainless steel chip guard.
For high speeds, shock absorbers are inserted in these positions. They are very effective in reducing impact between boxes during movement. There shock absorbers allow working speeds considerably higher than those previously possible, while simultaneously reducing noise levels and wear. This innovation, together with precision production methods, makes it possible to accommodate even the fastest machine tools.
For heavy covers:
1) Over 110kg for horizontal covers
2) Over 70kg for front or vertical covers.
Special supports are included for easy, secure lifting.
Telescopic Steel Cover
Telescopic Steel Covers,Stainless Steel Covers,Accordion Shield Cover,Telescopic Round Shield Cover,Machine Shields
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com