Unipolar modular trolley wire maintenance instructions

Unipolar modular trolley wire maintenance instructions:

Safety slide wires should be inspected regularly during normal operation, because power equipment is the main production tool for each industrial and mining company. A slight error will directly affect the production efficiency of the factory. When checking the trolley wire, check whether there is any looseness and disengagement at every 6m. When checking the conductive device, check whether the movable part is flexible, whether the tension spring is fatigued, the brush is worn, etc. (These conditions will affect To track the conductive properties and the tracking performance of the conductor should be adjusted in time).

During the renovation of holiday equipment, the conductive device is pulled out of the catheter and the brush roller of the conductive device is inspected for wear. If the brush is less than the specified effective length, it must be promptly replaced. When the guide roller is deformed seriously, it must be replaced to maintain the conductive device. Run normally and brush well and check the cause. Safe slide wire In all parts, the brush is the only part that will normally wear out.

I. Product Description

TC-EM-1 is a polymeric emulsifier, which is a low molecular weight, high electropositive organic polymer. It has followed advantages:

1. Easy to use, do not need cooking. Reduce cooking equipment for solid starch and lower down technical condition fluctuation for cooking the starch.

2. Use current water to dilute and prepare, without heating.

3. Provide a strong positive charge to the system

4. High emulsion stability

II. Product Feature

Appearance	Red brown liquid
Solid content %	25. 50Â±0.5
Ionicity	Cation
PH value	3.50~4.50
Viscosity(mpa.s/25â„ƒ)	60.0

AKD Emulsifier

III. Product Usage Safety Instruction:

TC-EM-1 may be stimulative to skin and eyes, and it is recommended to use gloves and protective glasses when use. If eye or skin comes into direct contact with this product, immediately rinse with plenty of water for at least 15 minutes.

IV. Application

As a emulsifier and stabilizer of AKD,TC-EM-1 can provide a good stability of the emulsion. With the mechanical stirring, it can disperse AKD as required in the production process, which average particle diameter more than 80% can be less than 1.2 microns. It can also maintain a relative long time after the emulsification, and it has a certain electrical neutral to the slurry.

Please note, under high hardness, the hydrolysis rate of AKD emulsion will be greatly improved. So in order to reduce the rate of hydrolysis, the PH value of emulsified should be controlled between 4.5~5.0 by Citric Acid. TC-EM-1 has low PH value, which saves this part of the operation.

For certain application, the usage of TC-EM-1 should also follow the operating instructions of our company.

V. Other Information

Package: 1000Kg /IBC barrel

Storage: in cool and dry place, avoid frozen and sunshine

Shelf life: 6 months.

AKD Emulsifier

AKD Emulsifier,Starch Based Emulsifier,AKD Emulsifying Agent,25% AKD Emulsifier

Shandong Tiancheng Chemical Co., Ltd. , https://www.akdchemical.nl