Classification analysis of bearing methods for radiators

Source: Bearing network time: 2018-07-20

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The bearing method refers to the bearing type used by the air-cooled radiator fan. In mechanical engineering, there are many types of bearings; however, there are several types of applications on the radiator: sleeve bearings with sliding conflicts and These three types are mixed with rolling friction ball bearings and two bearing methods. In recent years, new radiator manufacturers have introduced new technologies in bearings; such as magnetic bearings, water bearings, magnetic core bearings, and Laifu bearings. The basic method of the bearing is improved; the operating principle is still unchanged. Usually the air-cooled radiator is mainly used oil bearing and ball bearing.
Oil-bearing bearings are sleeve bearings that use sliding conflicts; lubricants are used as lubricants and drag reducers; low noise during initial operation; low cost of production; but the bearing wear is severe; life is much larger than ball bearings And the bearing is used for a long time; due to the reason of the oil seal (the computer radiator product can not use the advanced oil seal; usually the usual paper oil seal); the lubricant will gradually evaporate; and the dust will enter the bearing; The fan speed is slow; the noise is increased; the severe ones will cause the violent sensation caused by the wear of the fan due to the wear of the bearing. These images are presented; either the oil seal is turned over or the new fan is screened.
Ball bearings change the conflict method of the bearing; the roll friction is used; this method is more useful to reduce the conflict between the bearing surfaces; useful to promote the life of the fan bearing; thus extending the service life of the radiator The shortcoming is that the process is more messy; the promotion of the cost, together with higher operating noise.

Recommend to friends comments close window

Bearing related knowledge

Storage of timed smooth protective bearings for ceramic cages and zirconia all ceramic bearing bearings
Fag imported bearings limit speed and heat treatment upswing method bearing professors describe the reason why SKF bearings are rusty

This article links to http://
Please indicate China Bearing Network http://

Previous: Radial preloading method and axial preloading method for rolling bearings Next: How to properly use and protect wheat combine harvester

Hydraulic Pillar Steel Pipe From China

Used in making thte coal mine hydraulic bracket and pillar . also can be used for other hydraulic equipment.

DIN 1629, GB/T 17396 seamless steel tubes for hydraulic pillar service

Basic Info.

Model NO.

15-1020mm* 3-100mm

Standard

GB/T 17396/DIN 1629

Length

Ramdom or Approximate

Certificate

API, ISO 9001, etc.

Grade

20#, 35#, 45#, 27simn

Od Available

15 mm to 1020mm

Wt Available

3 mm to 100 mm

End Face

Random or Approximate

Pipe Marking

Paint Stencilled

Pipe Coating

as Required

Delivery Condition

as Rolled

Trademark

Yuanhua

Transport Package

2 Tons/Bundle

Specification

OD: 15-1020mm; WT: 3-100mm

Origin

Liaocheng China

HS Code

7304192000

Seamless Hot-rolled Steel Tubes For Hydraulic Pillar Service

Hydraulic Pillar steel tubes

Liaocheng Xinglong Seamless Tube Manufacturing Co., Ltd. , https://www.lcxlpipe.com