Sanitary ware purchase must be a good "three levels"

When decorating the living room, many people only noticed prominent places, such as whether the floor tiles of the lobby were laid flat, whether the ceiling was beautiful, or whether the manual work of the scraping of the walls was delicate and smooth. Generally speaking, the selection of the living room decoration will be more attention to work, but it is worth noting that the selection of the bathroom bathroom will be neglected. The bathroom is the most commonly used function space in daily life. Therefore, when the owner is refurbishing, they must pay special attention to the decoration of the bathroom, especially the purchase of the sanitary ware must be “good”, if possible, it is best to go Purchase.


Lejia bathroom    Zhong Tao Sanitary Ware   Cano tile

First, buy water basin

Pay attention to the "overflow mouth"

The general washbasin, along the edge near the basin mouth, will have an “overflow mouth”. In the process of releasing the good washbasin, once the water level reaches the “overflow mouth”, the “excess” water will quietly follow the “overflow mouth”. Into the drain. If an unsatisfactory washbasin is purchased, the water reaches the “spill” and does not overflow smoothly along the “spill”. It will overflow the basin or even flow to the floor, causing the floor to get wet and dirty. Therefore, when purchasing wash basins, be sure to try several times more to see if the “spill” works properly.

Second, the toilet

Pay attention to whether the drain is "smooth"

Many owners choose to pay attention to whether the shape is beautiful and whether the seat is comfortable when they buy a toilet. These two points are only superficial. In fact, when the toilet flushes, it is more important whether the dirt can be washed away. When consumers purchase, they generally try the flushing effect, but the smooth flushing out of tap water does not mean that the “debris” can also be washed away smoothly. In addition to seeing whether or not the flushing is fast and powerful when purchasing, it is best to check if the bottom of the drain is “smooth”. You may wish to reach out and touch the bottom of the drain to see if the glaze distribution is even and smooth. It is rough and it is easy to cause obstruction when excreted in the future.

Third, the toilet tank to buy

Pay attention to the "double valve"

At present, the capacity of domestically-made toilet tanks is basically 6 to 8 liters. In order to save water, the size of the water tank is not the key, but mainly the control of the flushing water by the valve. Most of the old water tanks have only one valve. No matter whether the solution is large or small, when the water is filled, the whole tank of water is poured out, which is not conducive to water conservation and environmental protection. Therefore, the purchase of "double valve" water tank can solve this problem. When the solution is small, press the small valve on the left and only one or two or three liters of water (about half a tank of water) can flush the toilet clean; after the big solution, press the big valve on the right to flush out the whole box of water. The double-valve water tank saves water expenses for itself and also contributes to saving resources for environmental protection.

Links: Bathroom furniture also waterproof bamboo bathroom cabinet 3 major maintenance rules
Selecting the four "strategies" of sanitary ware for the perfect design of bathroom

Sanitary ware bathroom partition window decoration toilet bathroom decoration design music furniture decoration living room floor tile bathroom tile bathroom door bathroom ceiling bathroom sink bathroom design bathroom waterproof floor tile ld tile

Optical Analysis Machines

Optical Microscopy
In optical microscopy different filters are used to improve contrast and emphasize specific features based on material properties. This can be achieved with magnifications typically ranging from 2.5 times up to 1,000 times. In materialography, reflected light is the most commonly used type of light optical microscopy. Transmitted optical microscopy is also used, but mainly for mineralogy specimens.

Stereo Optical Microscopy
The stereo microscope is an optical microscope variant, designed for low magnification observation of a specimen, using the light reflected from the specimen surface.

Scanning Electron Microscopy
A scanning electron microscope (SEM) is a type of electron microscope that produces images of a specimen by scanning the specimen surface with a focused beam of electrons. The electrons interact with the atoms in the specimen, producing various signals that can be translated into information about the surface topography and the composition of the specimen.

Transmission Electron Microscopy
Transmission electron microscopy (TEM) uses a beam of electrons transmitted through an ultra-thin specimen and that interacts with the specimen as it passes through it. Generated signals can be translated into various types of information, including information on the type and orientation of individual crystals.

metallographic sample preparation for microscopy,sample preparation for metallurgical microscope,optical microscope for metallurgy

TROJAN (Suzhou) Technology Co., Ltd. , https://www.trojanmaterial.com

This entry was posted in on