The aviation manufacturing sector has always been one of the most intensive industries in advanced technology. In the main bearing structure of modern aircraft and engines, the proportion of the overall structural components increases rapidly. These parts are usually cut with integral blanks (plates or forgings), and the weight of the finished parts is only 10% to 20% of the blank. The remaining 80% to 90% of the material becomes a chip. The workpiece material size is large, and the cutting precision and surface quality requirements are very high, so the difficulty of cutting is self-evident, so the requirements for cutting tools are getting higher and higher.
As a world-renowned tool supplier, Seco is also a leader in manufacturing processes and technology. In recent years, Seco has accumulated rich experience in the aviation industry. It is well known that the manufacture of landing gear relies on high-strength, cutting-edge materials that are increasingly difficult to process. The key to Seco's success in this area is largely dependent on our ability to bring together world-class team of experts to actively develop new carbide grades, machining strategies and tooling systems. Many of the developments of the expert team are now one of our standard product lines for landing gear processing.
An airline is a well-known aircraft landing gear system manufacturing company that is a world leader in the design, development, production and technical support of aircraft landing gear. Recently, the airline has invested a large amount of money to introduce a large horizontal machining center of a well-known international brand, and set up a project team for a certain landing gear project to coordinate the entire processing process, and also very cautious in the selection of tools.
Due to the large size of the table, in order to ensure the optimization of the machining process, the optimum placement position of the workpiece is in the middle part, which causes the problem that the distance between the end of the spindle and the workpiece processing part is too long to access the processing area. In general, inaccessible machining areas (such as complex large monolithic workpieces and deep cavities) require long overhanging tools for machining. As a result, the project team threw out this problem to the tool suppliers of several famous brands.
After knowing the customer's needs, Seco Tools sent technical experts to recommend to the project team the latest Steadyline vibration-damping face milling shank.
Steadyline solves the problem that has plagued many cutting experts all the time, that is, the problem of cutting effect and machining efficiency in the state of long overhang. Some deep cavity machining, machining on horizontal machining centers, complex integral parts in the aerospace and automotive industries, and parts for power generation equipment used in mold processing, many of the expanding applications can be optimized with Steadyline technology. ! Therefore, for this problem of the project team, Steadyline can be described as the right medicine.
The design concept of Steadyline is to achieve the effect of “long overhang and small vibrationâ€, which is commonly known as anti-vibration. This type of tool holder system completely enhances the rigidity during milling. In the case of long overhangs, the cutting parameters can reach a new height, even with ordinary length milling cutters. Stable cutting conditions improve machining processes, reduce vibration and increase tool life. This vibration damping solution developed by Seco guarantees optimum stability even under long overhang conditions.
Products characters
1.All the products produced by good quality building material factory need get through three strict inspections before packing: Raw material cutting test, Production process inspection, The finished debugging.
2.Providing customized service to apply each customer requirements, we will try our best to achieve 100% customer satisfaction.
Profile
1.High quality aluminum alloy profiles, thickness 1.2-2.0mm
2.Excellent quality thermal break aluminum profiles, thickness 1.4-3.0mm
3.PVC/UPVC material (need to be ordered)
Color
White/ Sliver / Grey / Champagne / Black / Wood grain / special color can be ordered
Glass Type
1.Single toughened glazing:6mm/8mm/10mm/12mm...
2.Double toughened glazing:5+12A+5mm/6+12A+6mm...
3.Laminated glazing:5+0.38PVB+5mm/6+0.76PVB+6mm...
4.Low-E glazing:Green/Blue/Brown/Golden...
5.Other glazing:frosted glass/crystal glass/art glass...
Mesh
1.Aluminum security mesh
2.Stainless steel security mesh
3.Solid iron security mesh
4.Mosquito net(Nylon,Stainless steel,Diamond)
Hardware
1.Germany brand
2.Japanese brand
3.Chinese top brand
Surface treatment
1.Anodizing
2.Powder coating
3.Electrophoresis
4.Fluorocarbon paint
Glass Sliding Door,Tempered Glass Sliding Door,Double Glass Sliding Door,Automatic Glass Sliding Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.selfrepairinghighspeeddoor.com