Disassembly principle content Before disassembly, the relationship between the bearing and the related parts should be clarified. Carefully observe the relationship between the position of the bearing and the related parts, analyze the installation process and method, and then formulate the disassembly method and procedure. The inner and outer rings of the bearing are usually made of interference fit. In order to ensure the accuracy of the fit and shorten the repair period, the disassembly method can be removed without using the scientific disassembly method. 1. The bearing on the journal should be disassembled. Apply force to the inner ring, remove the bearing on the bearing seat and apply force to the outer ring 2. When disassembling the inner ring or outer ring of the bearing, the force should be balanced and uniform, and should not be skewed to prevent jamming. 3. When disassembling the bearing, it is not allowed. To strike with a rupturable object, it must be removed by pressing or using a special removal tool. In some cases, it can be tapped with a copper rod or other soft metal gasket.
Concerned about surprises
Tag: Rolling bearing Disassembly
Previous: What are the repair and control methods for gear transmission noise Next: Hardware knowledge: teach you how to use and maintain hardware locks
Tangless Helicoil Inserts do not require a tang to complete the installation process and therefore, do not require breaking of a tang after installation resulting in spent coil sections for disposal. Instead, a Tangless coil Thread insert includes an insert-driving notch to aid in the installation process.
Tangless Thread Insert,Tangless Coil Threaded Insert,Thread Inserts Without Tang,Tangled Wire Thread Insert
Shenyang Helisert Technology Co., Ltd , https://www.helisert.com