[China Aluminum Industry Network] 1. Preface
Solar energy is a new and inexhaustible source of pollution-free green energy. It is one of the seven emerging industries that China has determined to focus on its development. The pillars, rods, support legs, etc. of the battery panel frame and its supporting structure can be used currently. The extrusion and manufacturing of economical and durable aluminum alloy materials is a new market for the application of aluminum alloy materials and has been applied globally. The following briefly introduces the production process technology and key nodes of the solar photovoltaic aluminum manufacturing process for reference.
2. Optimize the design and manufacture of aluminum extrusion die
Extrusion die is an important tool to ensure the shape and dimensional accuracy of solar photovoltaic aluminum profiles. Extrusion die design and manufacturing quality is an important guarantee for high quality, high output, low consumption, high efficiency, and low cost for extrusion production. Therefore, to produce and manufacture high-precision photovoltaic aluminum alloy profiles, it is necessary to optimize the design and manufacture of extrusion dies.
2.1 The use of advanced extrusion mold manufacturing equipment
High-precision advanced extrusion die processing equipment is a prerequisite for ensuring the qualification of metal extrusion die. Therefore, the production of photovoltaic aluminum alloy profile should adopt advanced mold processing equipment, such as CNC, slow walking wire cutting, three-axis machining center, EDM machining center, etc. to improve the precision and performance of the mold.
2.2 Reasonable arrangement of die holes
In order to ensure the good symmetry of photovoltaic aluminum profiles and improve production efficiency and yield, the arrangement of die holes must abide by the principle of central symmetry, and use symmetrical arrangement of multi-mode holes. Design the mould process and try to design the bridge position on the non-decorative surface of the profile to avoid exposure of defects.
2.3 Optimized Extrusion Die Design Work Belt
The working belt is the part that stabilizes the dimensions of the product and guarantees the surface quality of the product. When designing the length of the mold working belt, it is necessary to reduce the drop as much as possible, to be gentle in length change, and to use the obstruction angle and the promoting flow angle to reduce the metal flow rate, and to achieve uniform metal flow and improve the surface quality of the profile.
3. Chemical composition control
The use of 6063 aluminum alloy material for production, the chemical composition control shown in Table 1.
Practice shows that the use of 6063 aluminum alloy has become an important choice for producing high-precision photovoltaic aluminum alloy profiles. 6063 aluminum alloy belongs to Al-Mg-Si series heat treatable aluminum alloy. The alloy reinforced phase is Mg2Si. It has good extrusion performance and low quenching sensitivity, good high temperature plasticity, wide quenching temperature range, and low critical quenching rate. In the 6063 aluminum alloy composition range specified in the national standard GB/T3190, different values ​​of the chemical composition will result in different material properties. When the chemical composition is in a large range, the performance difference will fluctuate within a wide range. As a result, the overall performance of the profile can be difficult to control. In order to ensure the precision of photovoltaic aluminum alloy profiles,
The chemical composition of the alloy must be determined in strict accordance with the company's control standards.
4. Process for smelting, casting and ingot homogenization
4.1 Melting and refining process
It is smelted in a rotary regenerative smelting furnace and the melting temperature is 720-760°C. At a temperature above 720°C, high-purity nitrogen is used to inject the refining agent into the refining agent for 15 minutes. The amount of the refining agent is 0.08% of the melt weight. After refining, the mixture is electromagnetically stirred for 15 minutes, and the aluminum liquid is allowed to stand for 20-30 minutes. Sampling inspection strictly controls the chemical composition of the aluminum alloy solution so that the material achieves the required mechanical properties.
4.2 Casting process
A semi-continuous direct water-cooled casting method was used. The direct water cooling method has a large cooling intensity and a fast cooling rate, which refines the casting structure and increases the density of the structure, thereby improving the mechanical properties and the heat treatment effect of the ingot. Control casting temperature 710-730°C, casting speed 50-70mm/min, cooling water pressure 0.1-0.3MPa. In order to reduce the tendency of hot cracks and improve the chemical composition of the alloy, online addition of aluminum-titanium-boron wire, the addition speed is 1700-2000mm/min.
4.3 Homogenization of cast rod structure
In order to reduce and eliminate the intragranular segregation of ingots and improve their chemical composition and structural heterogeneity, aluminum alloy cast rods were homogenized. The technical condition of the control is to heat the cast rod to 540-550° C., hold it for 8-10 h, and the strong wind cooling and water mist cooling. After the homogenization annealing, the cooling should be accelerated to ensure the uniformity of color after anodizing.
5. Process and technical condition control of extrusion and aging processes
6063 aluminum alloy extrusion extrusion, online quenching and aging technology conditions, take control of the casting rod heating temperature: 440-480 °C; mold heating temperature: 450-480 °C, mold heating time is less than 5h; extrusion barrel heating temperature 460 -500°C; Extrusion speed: 12-18m/min; Outlet temperature 510-550°C; Cooling method is on-line air cooling or water mist cooling; Extrusion profile after on-line quenching aging treatment: Control temperature is 200±5 °C, holding time: 3h. The combination of solution treatment and extrusion process of 6063 aluminum alloy can avoid grain growth and improve the physical and mechanical properties of profile products.
ECB (blend ethylene vinyl acetate copolymer with asphaltic resin) waterproofing roll material is the first choice of domestic and overseas tunnel and dam waterproofing projects. It' s the ethylene vinyl acetate copolymer by two-section extrusion three-roller calendering manufacturing. belong to environmental protection material.
Performance Characteristics:
Flexibility, cold resistance, flexibility, stress crack resistance, light weight.
Executive Standard:
TB/T 3306.1-2014 GB18173.1-2012
Specification:
Thickness: 1.0-3.0mm Width: 1- 3m
Application:
Especially suitable for the waterproof material of dome inner surface. also can be used to tunnel lining , underground project various construction joints drainage and aterproof. and blind drain drainage.
ECB Waterproofing Roll Material
Ecb Waterproofing Roll Material,Ecb Waterproof Roll,Ecb Macromolecule Waterproof Roll,Ecb Waterproofing Roll
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com