Pump maintenance and maintenance Note: 1. Water corrosion of the pump, so the water-borne substances prohibited the pump vacuum, the use of water pump vacuum. 2. Contains a lot of solvent substances First remove most of the solvent in the oven, and then use a vacuum pump. 3. Use the vacuum pump in the correct sequence to prevent reverse suction. 4. After using the vacuum oven, be sure to do a good job of cleaning, vacuum cleaning oven glass. 5. Wipe the surface anti-rust oil. 6. Clear the governor cavity, injection pump cavity anti-rust oil, add the required grades of lubricating oil. 7. The anti-rust oil in the fuel pipeline should also be removed before use. Connect the fuel to the fuel injection pipe line and keep rotating the fuel injection pump camshaft until the oil-out valve is tightly closed to emit clean fuel. 8. Fuel selection is reasonable. 9. You must use the fuel labeled. The general use of No. 0 diesel in summer, winter use -10 light diesel oil. 10. The fuel used must be clean and contain no impurities or moisture.
Rail Fastening System,Fastening For Urban Transit,W14 Rail Fastening,E20 Rail Fastening
TAICANG ZHONGBO RAILWAY FASTENING CO., LTD. , https://www.railfastener.com