How to achieve effective control and management of personnel access? The core equipment that is usually required to be used in the channel control design is a gate that directly communicates with the access controller. The types of gates that can be selected usually include: half-height revolving doors, fast-track three-roll gates (also called three-roll gates), full-height doors (also called full-height swing gates, rotating gates). How to use the most suitable gate products within the appropriate budget to achieve the best channel access control effect? In general, the following points need to be considered in the selection of traffic control equipment gates:
1. Site use environment of the gate;
2. The user's use requirements;
3. The number of people passing through the gates and their flow;
4. Special functions that need to be implemented.
How to choose the gate? When choosing a gate, it is not always necessary to choose the most expensive or best product that is best suited to the budget. In the following, a factory uses a three-roll gate as a channel control device as an example. The three-roll gate should be selected according to the following conditions to explain how to select the gate product. The specific conditions for the use of the gate are listed below.
There are 3,000 gates installed at the factory gate factory. For every shift of 1000 people, all shuttles arrive within 10 minutes. 1. Consider the speed of use. Prevent the phenomenon of waiting for a long time while commuting.
1000 people per shift. It needs to pass 100 people per minute; all within 10 minutes.
Three roller gate speed of 15-25 people / minute. Calculated according to 20 people/minute; actual time depends on usage habits and access control system response time.
Ensure that there will be no conflict between people entering and leaving the shift.
At least 5 three-roll gates are required.
The frequency of use of three roller gates close to 100% during work hours
2. Consider the frequency of use of the gate. >
The gates of the attraction use the difference between the frequency of the use of the gate and the factories and attractions at various times of the day; the factory gates are most often used during work hours.
The frequency of use during rush hour will approach 100%
If you use 5 sets of three roller shutters.
If using a 100% frequency machine. But if you use 40% of the frequency of equipment, five devices can meet. Need more than 13 units;
Play a proper role.
The right product is used in the right place.
Reduce future equipment maintenance and update costs.
3. Consider the service life of the gate. >
Assume that 5 devices are used. Each machine works 1200 times a day and each person goes in and out once a day. Work about 400,000 times a year;
Select equipment with a life of less than 1 million times. In less than a year there will be major area failures of major components, the overall life expectancy of 2-3 years. Need to be replaced;
Select a trouble-free operating frequency of 300-500 million devices. The overall life span is more than 10 years; the main components can work without failure in 5-10 years.
4. Consider the aesthetics of the gate.
Semi-open use depends on the sea city. ;
Ordinary housing data, paint spray plastic three-roll gate carefully used. Better to import or higher; at least AISI 304 stainless steel.
Internal antiseptic handling material thickness. Water chestnut processing. Wire drawing processing.
Large flow of people. If the requirements cannot be met, there is not enough space for the three-roll gate. You can consider choosing a fast-channel product. The fast track is more beautiful, faster, safer, and more convenient than the three-roll gate. Although the price is more expensive, it is widely used because of price barriers. However, in the more advanced foreign-funded factories, the fast-track will be destined to become an increasingly popular product and play an important role that cannot be replaced by a three-roll gate.
Good fast channel product at speed. The use of Shou has an absolute advantage, frequency. Pedestrian access products are unmatched by other products and thus become the first choice for channel control products for large/very large factories or high-rise office buildings. Even during the peak hours of work and commuting, the same can be dealt with without having to set the normally open state, which greatly improves the safety and overall efficiency.
When the gates are used in office buildings. Need to consider the following points: How to choose a gate? Use of indoor gates.
1. The number of users. Use frequency, people flow. Service life
2. Little noise;
3. Beautiful appearance;
4. With emergency evacuation function.
Pedestrian access control equipment in office buildings. The appearance of a beautiful style can be considered mixed use of fast lanes and swing doors. Fast channel plus swing door use. Greatly enhance the image of the modernization of the place, and the function is more comprehensive in practical use. People can get on and off the fast track, which can better control the entry and exit of people in the building. Persons with disabilities or persons carrying large cargoes can pass through the door to make the gate more user-friendly. The swing door can also be used as a VIP channel. When an important customer or leader comes to watch, the door can be opened and the person can quickly pass through. There is no need for the customer or leader to pass through the fast track one by one.
When purchasing pedestrian control equipment such as half-height revolving doors, fast-passage three-roll gates, full-height gates, and swing gates. Can make the gate machine play the greatest utility in the daily use in the future. After reading this article, I hope to consider the above issues. There will be a more in-depth understanding of how to choose a gate.
1. Site use environment of the gate;
2. The user's use requirements;
3. The number of people passing through the gates and their flow;
4. Special functions that need to be implemented.
How to choose the gate? When choosing a gate, it is not always necessary to choose the most expensive or best product that is best suited to the budget. In the following, a factory uses a three-roll gate as a channel control device as an example. The three-roll gate should be selected according to the following conditions to explain how to select the gate product. The specific conditions for the use of the gate are listed below.
There are 3,000 gates installed at the factory gate factory. For every shift of 1000 people, all shuttles arrive within 10 minutes. 1. Consider the speed of use. Prevent the phenomenon of waiting for a long time while commuting.
1000 people per shift. It needs to pass 100 people per minute; all within 10 minutes.
Three roller gate speed of 15-25 people / minute. Calculated according to 20 people/minute; actual time depends on usage habits and access control system response time.
Ensure that there will be no conflict between people entering and leaving the shift.
At least 5 three-roll gates are required.
The frequency of use of three roller gates close to 100% during work hours
2. Consider the frequency of use of the gate. >
The gates of the attraction use the difference between the frequency of the use of the gate and the factories and attractions at various times of the day; the factory gates are most often used during work hours.
The frequency of use during rush hour will approach 100%
If you use 5 sets of three roller shutters.
If using a 100% frequency machine. But if you use 40% of the frequency of equipment, five devices can meet. Need more than 13 units;
Play a proper role.
The right product is used in the right place.
Reduce future equipment maintenance and update costs.
3. Consider the service life of the gate. >
Assume that 5 devices are used. Each machine works 1200 times a day and each person goes in and out once a day. Work about 400,000 times a year;
Select equipment with a life of less than 1 million times. In less than a year there will be major area failures of major components, the overall life expectancy of 2-3 years. Need to be replaced;
Select a trouble-free operating frequency of 300-500 million devices. The overall life span is more than 10 years; the main components can work without failure in 5-10 years.
4. Consider the aesthetics of the gate.
Semi-open use depends on the sea city. ;
Ordinary housing data, paint spray plastic three-roll gate carefully used. Better to import or higher; at least AISI 304 stainless steel.
Internal antiseptic handling material thickness. Water chestnut processing. Wire drawing processing.
Large flow of people. If the requirements cannot be met, there is not enough space for the three-roll gate. You can consider choosing a fast-channel product. The fast track is more beautiful, faster, safer, and more convenient than the three-roll gate. Although the price is more expensive, it is widely used because of price barriers. However, in the more advanced foreign-funded factories, the fast-track will be destined to become an increasingly popular product and play an important role that cannot be replaced by a three-roll gate.
Good fast channel product at speed. The use of Shou has an absolute advantage, frequency. Pedestrian access products are unmatched by other products and thus become the first choice for channel control products for large/very large factories or high-rise office buildings. Even during the peak hours of work and commuting, the same can be dealt with without having to set the normally open state, which greatly improves the safety and overall efficiency.
When the gates are used in office buildings. Need to consider the following points: How to choose a gate? Use of indoor gates.
1. The number of users. Use frequency, people flow. Service life
2. Little noise;
3. Beautiful appearance;
4. With emergency evacuation function.
Pedestrian access control equipment in office buildings. The appearance of a beautiful style can be considered mixed use of fast lanes and swing doors. Fast channel plus swing door use. Greatly enhance the image of the modernization of the place, and the function is more comprehensive in practical use. People can get on and off the fast track, which can better control the entry and exit of people in the building. Persons with disabilities or persons carrying large cargoes can pass through the door to make the gate more user-friendly. The swing door can also be used as a VIP channel. When an important customer or leader comes to watch, the door can be opened and the person can quickly pass through. There is no need for the customer or leader to pass through the fast track one by one.
When purchasing pedestrian control equipment such as half-height revolving doors, fast-passage three-roll gates, full-height gates, and swing gates. Can make the gate machine play the greatest utility in the daily use in the future. After reading this article, I hope to consider the above issues. There will be a more in-depth understanding of how to choose a gate.
Led Spot Light,Warm White Spotlight,7W Spotceiling Light,Brightness Kitchen Spotlight
Jiangmen Duramp Electric Co., Ltd , https://www.durampled.com