Four methods for increasing the yield of mushrooms

Plant growth hormone method: The concentration of plant growth hormone is different, and the mycelial growth effect of the mushroom is also different. The concentration of the indole acetic acid solution is less than 1 ppm, which promotes mycelial growth; and when it is greater than 1 ppm, the mycelial growth is inhibited. A 5 ppm naphthalene acetic acid solution promotes mycelial growth, while a 20-50 ppm naphthalene acetic acid solution inhibits mycelial growth. As long as the plant growth hormone is properly selected, applied at the right time, and the application method is correct, it can increase the yield.

Rare earth method: Rare earth can promote mycelial growth and increase dry matter weight, while rare earth can also promote the formation of fruiting bodies and increase yield. The mushroom was cultivated with a 20 ppm rare earth solution, and the mushroom yield was remarkable.

Magnetized water method: The mushroom is cultivated with the magnetized water mixture, and the mushroom hyphae are white and thick; the magnetized water is used to spray the fruit body, and the bagged mushroom can increase the yield by 12.83%. If the two are combined, the yield increase effect will be more obvious, and the bagged shiitake mushroom can increase the yield by 17.04%.

Electrical stimulation method: electrical stimulation is conducive to the formation of mushroom fruiting bodies. The specific operation method: soak the mushroom rods that have been 1-2 mushrooms in the water for about 12 hours, take out the surface moisture, and the water content of the bacteria bars is 60%. ~65%, connect the two conductive rods with wires, insert the bacteria rod, turn on the power, voltage 220 volts, current 1-2 amps, energize for 5 minutes, then manage the mushrooms according to the routine.

Total 1 | <First <Prev 1 Next> Last> |
share to:

Overhead Sectional Door

Overhead sectional door most widely used for loading areas on all types of industrial premises and Designed with a curved overhead track, these vertically-opening sectional doors can be installed in areas with reduced head room. They provide heat and sound insulation with its composite panel construction.

The counterbalance and cable system provides quiet and straight forward operation for manual doors. Electric operation is available for larger applications that can incorporate many alternative operator options to suit all client requirements.

The standard outer panels are manufactured from 0.5mm thick, high quality zinc coating to BS EN 10147

For the best weather protection the sectional door panel has an interlocking hinged joint integrating a high quality seal the full length of the panel.

A counterbalance system is incorporated into the sectional overhead door to ensure efficient and effortless operation.

The counterbalance comprises of springs mounted on a steel shaft that are high tensile helical wound steel. It has been heat treated for enhanced performance for around 50,000 cycles.

Reducing shaft friction is achieved with the aid of brackets and guide rollers incorporating highest quality sealed bearings.

Overhead Sectional Door,Overhead Sectional Garage Door,Automatic Overhead Sectional Door, Overhead Insulated Garage Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com

This entry was posted in on